If you cannot see the SSID you were given in the list of available networks, but you can see other networks, there are a few steps you can take to try to resolve the problem:
1. Check your laptop's wireless settings: Make sure that your laptop's Wi-Fi adapter is turned on and functioning properly. Check if you accidentally disabled the Wi-Fi or put your laptop in airplane mode, as this can prevent you from seeing any networks.
2. Refresh the network list: Sometimes, the list of available networks may not update automatically. Try manually refreshing the network list on your laptop. You can do this by disabling and then re-enabling the Wi-Fi adapter or using the "Refresh" or "Scan for networks" option in your laptop's network settings.
3. Move closer to the wireless access point: If you're far away from the wireless access point, the signal strength might be weak, leading to the SSID not being detected. Move closer to the access point and check if the network appears in the list of available networks.
4. Ensure SSID broadcasting is enabled: Some network administrators choose to disable SSID broadcasting for security reasons. In such cases, the network won't appear in the list of available networks. If you suspect this might be the case, you can manually add the network by entering the SSID and the passphrase in your laptop's network settings.
5. Contact the IT department: If none of the above steps work, it's best to reach out to the IT department or the person responsible for network management at your new company. They can provide assistance and verify if there are any specific network configurations or restrictions that might be preventing you from seeing the SSID.
By following these steps, you should be able to troubleshoot the issue and potentially connect your laptop to the wireless network at your new company.
To know more about SSID, please click on:
https://brainly.com/question/30454427
#SPJ11
How to fix boolean value of tensor with more than one value is ambiguous?
Answer:
can access the value of a tensor by using indexing and slicing. Indexing is used to access a single value in the tensor.
Explanation:
A deceptive email is typically used in a phishing attack. Which of the following is most likely a legitimate email address
Fraudulent emails are commonly used in phishing attacks. Below are the most likely legitimate email addresses and cybersecurity.
The art of protecting Internet-connected systems, such as computers, servers, mobile devices, electronic systems, networks and data, from malicious attacks is known as cybersecurity. Cybersecurity can be divided into her two parts: cyber and security. Cyber refers to technology, including systems, networks, programs, and data. Security is about protecting systems, networks, applications and information. Sometimes it is also called electronic information security or information technology security.
“Cybersecurity is a set of technologies, processes, and practices designed to protect networks, devices, programs, and data from attack, theft, damage, alteration, or unauthorized access.”
“Cybersecurity is a set of principles and practices designed to protect our computing resources and online information from threats."
Know more about phishing attacks here:
https://brainly.com/question/24156548
#SPJ4
PLEASE HELP U GET A LOT OF POINTS AND MARKED BRAINLIEST
This is a java question.
How do you make a if statement in a while loop, so the if statements condition is that if the while loop is on the second run?
Answer:
Conditional statements with the proper comparison and boolean operators allow the creation of alternate execution paths in the code. Loops allow repeated execution of the same set of statements on all the objects within a sequence. Using an index based for loop is best suited for making changes to items within a list.
Explanation:
1. In which order do the problem solving steps happen?
A) Try, Define, Prepare, and Reflect
B) Reflect, Prepare, Try, and Define
C) Define, Prepare, Try and Reflect
D) Reflect, Try, Prepare, Define
The correct order for the steps that happen in the mechanism of problem-solving may include Define, Prepare, Try and Reflect. Thus, the correct option for this question is C.
What is Problem-solving?Problem-solving may be defined as an act or complete process of defining a problem. This is done by determining the cause of the problem; identifying, prioritizing, and selecting alternatives for a solution; and implementing a solution.
The process of problem-solving begins with identifying the issue followed by defining and preparing the problem with respect to the process. It is a mental process that involves discovering, analyzing, and solving problems. The ultimate goal of problem-solving is to overcome obstacles and find a solution that best resolves the issue.
Therefore, the correct option for this question is C.
To learn more about Problem-solving, refer to the link:
https://brainly.com/question/23945932
#SPJ1
Project Stem 4.11 lesson practice question 5: What is the answer?
Answer:
world war 2 and nuclear weapons
Explanation:
file plans must be updated annually or more frequently if necessary.
True. File plans, are known as records retention schedules, are documents that outline how long different types of records should be kept and when they should be disposed of.
These plans must be reviewed and updated on a regular basis to ensure that they are current and aligned with the organization's needs and legal requirements. The frequency of updates may vary depending on the type of organization, but annual updates are a common practice. Additionally, if there are significant changes to laws, regulations, or the organization's operations that would affect the retention schedule, the plan should be updated more frequently.
The missing part in the question is shown below.
File plans must be updated annually or more frequently if necessary. True/False.
Learn more about file plans, here https://brainly.com/question/4339331
#SPJ4
Instant Feedback Tool: 2-3 Assignment: Write a Class Listen Get instant feedback on your assignment prior to submitting it to your instructor for grading. Write a Dog java Class Feedback: Tell me how well my program meets the assignment requirements. Write a Cat java Class Feedback Tell me how well my program meets the assignment requirements, Submit your assignment to all the options as many times as you need for feedback. You will still need to submit your assignment in the numbered item below.
You will examine a diagram of UML classes and construct either the Cat of Dog class in this activity.
Why do I require Java, and what is it?Java is a programming language used by programmers to create programmes for laptops, data centres, gaming systems, scientific supercomputers, mobile phones, and other gadgets. According to the Forbes list, which ranks the popularity of programming languages, Java is the third most used programming language in the world, after Python and C.
Why is Java so popular?Java may be used to build full apps that can be deployed among clients and servers in a network or run on a windows machine. As a result, users can use it to quickly create mobile applications or desktop programmes that run on programmes that use various servers and operating systems.
To know more about Java visit:
https://brainly.com/question/12978370
#SPJ4
What is the difference between static ip and dynamic ip?
A device's IP address does not change when given a static IP address. The majority of devices employ dynamic IP addresses, which the network issues to new connections and alter over time.
What use does dynamic IP serve?An ISP will let you to use a dynamic IP address for a brief period of time. A dynamic address may be automatically given to another device if it is not already in use. DHCP or PPPoE are used to assign dynamic IP addresses.For companies that host their own websites and internet services, static IP addresses are optimal. When distant employees are using a VPN to access the network at work, static IP addresses also perform effectively. For the majority of users, dynamic IP addresses are typically OK.A device's IP address does not change when given a static IP address. The majority of devices employ dynamic IP addresses, which the network issues to new connections and alter over time.To learn more about dynamic ip refer to:
https://brainly.com/question/14234787
#SPJ4
is there a value of a for which the mean value theorem applied to the interval guarantees a value c for which f'(c)
We can deduce that the opposite is also true according to the Mean Value Theorem.
Does the mean value theorem applied on the interval?According to the Mean Value Theorem, if a function f is continuous on the closed interval [a, b] and differentiable on the open interval (a, b), then there must exist a point c in the interval (a, b) such that f'(c) equals the function's average rate of change throughout [a, b].
The mean value theorem ensures that if a function f is differentiable over an interval from a to b, then there must exist an integer c on that interval such that f ′ (c) f'(c) f′(c)f, prime, left parenthesis, c, right parenthesis is equal to the function's average rate of change throughout the interval.
In general, the mean value theorem (also known as the Lagrange theorem) in mathematics asserts that there must be at least one point where the tangent to an arbitrary planar arc between two ends is parallel to the secant through those endpoints. In real analysis, it ranks as one of the most significant findings.
To learn more about mean value theorem refer to;
https://brainly.com/question/19052862
#SPJ4
Initial Public Offering A company registers an IPO on a website sellshares.com. All the shares on this website are available for bidding for a particular time frame called the bidding window. At the end of the bidding window an auction logic is used to decide how many of the available shares go to which bidder until all the shares that are available have been allotted, or all the bidders have received the shares they bid for, whichever comes earlier. The bids arrive from the users in the form of until the bidding window is closed. The auction logic assigns shares to the bidders as follows: 1. The bidder with the highest price gets the number of shares they bid for 2. If multiple bidders have bid at the same price, the bidders are assigned shares as follows: Each bidder in the same price group gets assigned one share each consecutively, with each bidder being arranged inside the group based on their timestamp. Once a bidder gets the number of shares they bid for, they will be removed from the above iterative process and the process which then continues until all bidders are removed or the shares get exhausted, whichever comes first. List the user ld's of all users who did not get even one share after the shares have been allocated. For example, bids come in as bids = [[1, 5, 5, 0], [2, 7, 8, 11, 13,7,5, 13, 14, 10, 3, 3]]. There are totalShares = 18 to allocate. The highest price bid is for user ld 2 for 7 shares at a price of 8, so that user gets 7 shares leaving 11 to allocate to lower prices. Users with ld's 1 and 3 each bid 5 for 5 and 7 shares, with bidder 1 having the earlier timestamp. After 5 iterations, 10 shares have been allocated with 5 shares going to each of these two bidders. Bidder 1 has the full allotment, bidder 3 has 2 more shares to buy and there is 1 share left to allocate. It goes to bidder 3 and all shares have been allotted. Bidder 4 is the only bidder who gets no shares. Function Description Complete the function getUnallottedUsers in the editor below. The function must return a list of integers, each an Id for those bidders who receive no shares, sorted ascending getUnallottedUsers has the following parameter(s): bids[bids[0]....bids{n-1}]: a 2D array of arrays of integers, ld, shares, price, timestamp named u, sc, bp, ts going forward totalShares: an integer, the total shares to allocate Constraints • 1 sn < 104 . 1 su, sc, bp, ts, totalShares < 108
Due to this property, Python has become the language of choice for encapsulating old C/C++/Fortran codebases and providing them with a dynamic user interface.
From the perspective of the ecology, the last bullet item is also one of the most crucial. It is very simple to transfer data to external libraries created in a low-level language thanks to NumPy's user-friendly C API. It is also very simple for external libraries to return data to Python as NumPy arrays. Due to this property, Python has become the language of choice for encapsulating old C/C++/Fortran codebases and providing them with a dynamic user interface.
Even though NumPy does not offer a lot of high-level data analysis functionality on its own, understanding array-oriented computing and NumPy will help you leverage tools.
Learn more about python here-
https://brainly.com/question/18502436
#SPJ4
Research various credit cards to find low APR's, transactions fees, annual fees, over limit fees. Report on the card you find
APR (Annual Percentage Rate): This is the interest rate you will be charged on your credit card balance if you carry it over from month to month. The lower the APR, the less you will pay in interest over time. It is impossible to obtain credit cards information.
What is the APR's and transactions fees about?Transaction Fees: Some credit cards charge fees for certain types of transactions, such as cash advances or foreign transactions. These fees can add up quickly, so it's important to find a card with low or no transaction fees.
Annual Fees: Some credit cards charge an annual fee for the privilege of using the card. While some premium cards may have high annual fees, there are many credit cards available with no annual fee.
Over Limit Fees: Some credit cards charge a fee if you go over your credit limit. This fee can be significant, so it's important to find a card that doesn't have this fee or that has a high credit limit.
Therefore, It's important to note that there are many different credit cards available, with a wide range of fees and features. It's a good idea to research several different cards to find the one that best suits your needs. It's also good to check the credit card's website for any fees and offers that are not mentioned in the advertisement.
Learn more about APR's from
https://brainly.com/question/1686286
#SPJ1
Which of the following is not a microprocessor manufacturing company?
01) AMD
2) Dell
3) Motorola
4) Intel
The company Dell does not produce microprocessors. American-based technology corporation Dell was founded. It creates, markets, maintains, and provides support for computers and related goods and services.
Which business does not make microprocessors?Nvidia. The central processing unit (CPU) of a computer is its mental center. CPUs are primarily produced by Advanced Micro Devices (AMD), Intel, IBM, Texas Instruments, and Motorola.
Does IBM make microprocessors?On August 23, 2021, at the Hot Chips 2021 conference, IBM unveiled the Telum, a microprocessor designed for its IBM Z mainframe systems. The Telum processor from IBM is the first to include on-chip acceleration for artificial intelligence inference while a transaction is being processed.
To know more about microprocessors visits :-
https://brainly.com/question/2091924
#SPJ4
When Jess applied for a job as an administrative assistant, she was required to take an employment test to evaluate her typing speed. What does that tell her potential employer about her typing?
Answer:
Srry about the first time i was kidding and the real answer is her accurate rate
Explanation:
Software developers_____their programs, while buyers only own the right to____use the software.
The majority of software works are copyright protected, which means that in order to use the software in any way, you must first obtain a license from the developer or other copyright holder.
How is using a piece of software sanctioned legally?The majority of software works are copyright protected, which means that in order to use the software in any way, you must first obtain a license from the developer or other copyright holder. Public domain products, on the other hand, are not protected by copyright; anybody is free to alter and utilize such software.The software application may be made available to users for a one-time price in exchange for ownership rights. It is generally accepted that this strategy—purchasing the license up front and acquiring the right to use the software perpetually—is the conventional method of owning software. Perpetual licenses are a particular kind of buying agreement.To learn more about software refer to:
https://brainly.com/question/28224061
#SPJ1
Consider the following code segment.
What are the contents of yourList after the code segment is executed?
A. [10, 30, 50, 70]
B. [20, 40, 60, 80]
C. [10, 30, 50, 70, 20, 40, 60, 80]
D. [20, 40, 60, 80, 10, 30, 50, 70]
C. [10, 30, 50, 70, 20, 40, 60, 80]. This is because the code segment first creates the list yourList with the elements [10, 30, 50, 70], and then it uses the extend() method to add the elements of the list [20, 40, 60, 80] to the end of yourList.
The extend() method does not replace the elements in the original list, but rather adds the elements of the specified list to the end of the original list. A list in Python is a collection of items, where each item can be of any data type, including other lists. Lists are created using square brackets [] and items are separated by commas. In this code segment, the list yourList is created with the elements [10, 30, 50, 70].
Learn more about code, here https://brainly.com/question/497311
#SPJ4
Write a program that creates a list called temperatures then adds five temperatures that are input by the user. The temperatures should be added as ints, not as strings. Then, print the list.
Sample Run
Enter a temperature: 45
Enter a temperature: 67
Enter a temperature: 89
Enter a temperature: 47
Enter a temperature: 89
[45, 67, 89, 47, 89]
Answer:
temperatures = []
i = 0
while i < 5:
try:
t = int(input('Enter a temperature: '))
temperatures.append(t)
i += 1except ValueError:
print('Enter a number')
print(temperatures
How does lower latency benefit the users connected to a network?
a. by expanding the range over which the network's signals are transmitted
b. by enabling more devices to connect to the network at the same time
c. by reducing the delay when sending and receiving data between devices
d. by limiting network access to users with higher security credentials
The benefit the lower latency for the users is c. by reducing the delay when sending and receiving data between devices. Latency, also known as "ping," is a measure of the time it takes for a data packet to travel from one device to another on a network.
Lower latency means that data packets are able to travel between devices more quickly, which results in faster communication between devices. This can be beneficial for a variety of activities such as online gaming, streaming, and video conferencing, where low latency is important for smooth and responsive interactions. Additionally, low latency can also help to improve the overall performance of a network by reducing delays and bottlenecks in data transmission.
Learn more about latency, here https://brainly.com/question/14264521
#SPJ4
The following program simulates a vending machine panel. The program gets an integer that represents the user's selected item, and then outputs a dispensing message. Only 8 items are for purchase. Ex: The input 2 results in the message "Dispensing item 2". Arrange the following lines to handle two exceptions. If the user enters an item number that is not for purchase, the program throws an Exception with the message "Try again", outputs the exception message, and then tries again. If the user enters a non- integer input, the program throws an Input MismatchException, outputs "Fatal error", and then exits. Not all lines are used in the solution.
To get the solution of the program, a while loop will be used to continuously prompt the user for an item selection until a valid selection is made.
The program uses a try-catch block to handle the exceptions. Inside the try block, the program gets the user's input, checks if the input is within the valid range of item numbers and throws an exception if the input is not valid.
The first catch block is for the InputMismatchException, which is thrown when the user inputs a non-integer value. The second catch block is for the Exception thrown in the try block when the user inputs an invalid item number. If an exception is caught, the program outputs the exception message and continues the loop, allowing the user to try again.
Here are the lines to handle the two exceptions;
import java.util.Scanner;
import java.util.InputMismatchException;
public class VendingMachine {
public static void main(String[] args) {
Scanner sc = new Scanner(System.in);
while (true) {
try {
System.out.print("Select an item (1-8): ");
int item = sc.nextInt();
if (item < 1 || item > 8) {
throw new Exception("Try again");
}
System.out.println("Dispensing item " + item);
break;
} catch (InputMismatchException e) {
System.out.println("Fatal error");
return;
} catch (Exception e) {
System.out.println(e.getMessage());
}
}
}
}
To learn more about while loop, use the link below:
brainly.com/question/15172842
#SPJ4
Which of the following is not a presentation software term?
Multiple Choice
a. Speaker Notes
b. Speaker Image
c. Slide
d. Slide Master
Speaker Image is not a term used in presentation software. The top presenting tools include G oogle Slides, Microsoft Powerpoint, Canva, Haiku Deck, and Visme.
What does the term "presentation software" mean?A genre of application program known as "presentation software" (sometimes known as "presentation graphics") is used to produce text and image sequences that convey a story, accompany a speech, or provide information during a public presentation.
Is PowerPoint a presentation-making program?Microsoft PowerPoint is a capable application for creating slide shows. It comes packaged with Word, Excel, and other office productivity tools as a typical part of the Microsoft Office software suite from the corporation. The application uses slides to present multimedia-rich information.
To know more about Microsoft Powerpoint visit :-
https://brainly.com/question/19250114
#SPJ4
what sound played when logging on to aol instant messenger?
Answer:you know buddy
Explanation:
All of the following relate to securing assets EXCEPT:
O Access to networks
O Access to end-user devices
O How third-party vendors ensure security
O The ease with which the system runs after a failure is corrected
O Access to servers
The following, all of which refer to protecting assets, but how quickly a failure is fixed and how easily the system resumes operation.
What three categories exist for software security?There are three different types of software security: security of the software itself, security of data handled by the software, and security of networked connections with other systems.
What three facets of network security are there?Confidentiality, integrity, and availability are the three key elements that make up the CIA triad, a model for information security. A fundamental goal of information security is represented by each component. Any data, device, or other element of the environment that supports information-related activities is referred to in the security of information, computers, and networks as an asset.
To know more about protecting assets visit :-
https://brainly.com/question/29930581
#SPJ4
two main parts of an object-oriented programming language include objects and models. group of answer choices true false
The statement "two main parts of an object-oriented programming language include objects and models" is true. In object-oriented programming, objects are instances of classes, which are templates for creating objects.
Objects have properties and methods, which are characteristics and actions that the object can perform, respectively. Models, on the other hand, are abstract representations of real-world concepts. In OOP, models are implemented as classes and are used to create objects that have similar properties and methods. Overall, objects and classes are fundamental concepts in OOP, which enable encapsulation, inheritance, polymorphism and other features that are core to the paradigm.
Learn more about programming language: https://brainly.com/question/23959041
#SPJ4
1. A DaaS arrangement _____.
a.
reduces hardware, software, and staffing related costs for the client
b.
allows clients to install, maintain, and monitor database in-house
c.
is much more expensive but also more secure than in-house databases
d.
Desktop-as-as-Service (DaaS) is a form of virtual desktop infrastructure where desktops are hosted in the cloud and delivered to remote users on-demand.
DaaS is also known as hosted desktop services, and it is typically provided by a third party. It is supplied as a subscription-based service and operates on a multi-tenant architecture. The benefits of VDI are realized while the complexity is reduced thanks to the service's handling of data storage, security, backup, and upgrades. End users can connect in to their desktops from any location, at any time, and using any device because client data is saved during login and logoff sessions.Businesses who wish to provide VDI power to their users but lack the resources and know-how to do so can greatly benefit from DaaS. Businesses can obtain top-notch gear and software without having to make big investments. Help desk efficiency increases as well as it goes virtual.
Learn more about DaaS here:
https://brainly.com/question/29448734
#SPJ4
Which 4 list types can be directly imported into quickbooks online from excel?
An Excel spreadsheet can be used to import Customer, Vendor, Items, and Chart of Accounts.
What is excel spreadsheet?A spreadsheet is a file that contains cells in rows and columns that can be used to organise, calculate, and sort data. A spreadsheet's data can include numeric values, text, formulas, references, and functions.The two most well-known spreadsheet applications available today are Microsoft Excel. When it comes to formulas and calculations, they are nearly identical. This implies that many of their characteristics are similar.When importing your products and services into QuickBooks Online, you can save time by using Excel CSV files. If you use sub-categories or sub-items, you must format your Excel file differently. Learn more about importing your goods and services.To learn more about excel spreadsheet refer to :
https://brainly.com/question/28435984
#SPJ4
How does the history of the internet explain the issues in cyberspace and cybersecurity now? Be sure to reference at least one specific issue that you read about in the timeline of the origins of the internet. this is a nearpod and i need help pls
Answer:
The history of the internet can explain the issues in cyberspace and cybersecurity today in a number of ways. One of the key factors is the rapid growth of the internet over the last few decades. This has led to a vastly expanded attack surface for hackers and cybercriminals, as well as a lack of security measures and best practices on many devices and systems that are connected to the internet.
One specific issue that can be highlighted is the lack of security built into the early internet. The early designers of the internet, such as Vint Cerf and Bob Kahn, focused on creating a functional network that could connect computers, with little consideration for security. As a result, the internet was initially built on a trust model where all users were assumed to be trustworthy, and this lack of security has carried over into today's internet. This lack of security in the early days is one of the main reason that made it easy for hackers to exploit and this is still a major problem in modern internet.
Another issue is the decentralized nature of the internet. This decentralization allows for great flexibility and innovation, but it also makes it difficult to impose security measures or regulations. Additionally, the rapid growth of the internet has made it hard for governments, companies, and individuals to keep pace with developments and adequately protect themselves from cyberthreats.
Finally, the expansion of the Internet of Things (IoT) and the increasing connectivity of everyday devices also create new vulnerabilities as these devices may not have the same level of security as traditional computing devices.
Overall, while the history of the internet has brought many benefits, it has also laid the groundwork for many of the cybersecurity challenges we face today.
Explanation:
the do loop is a variation of the ____ loop.
The while loop is a variety of the do loop, while the case structure is a version of the sequence structure.
How to use a while loop with an example?The do while loop is an exit-controlled loop in which the body of the loop will be run at least once even if the test condition is false. When you wish to end your program based on user input, for instance, is an illustration of such a scenario.
How does the while loop function?The while loop runs the code after first determining if the condition is true. Until the given condition returns false, the loop doesn't end. In contrast, the do while loop executes its code once before determining whether the condition is true.
To know more about while loop visits :-
https://brainly.com/question/15690925
#SPJ4
In this lab, you explore the Windows Server 2012 user interface as follows:1. Set a minimum password length as follows:a. In Server Manager, selectToolsto view the available administra±ve tools.b. SelectLocal Security Policy.c. ExpandAccount Policies.d. SelectPassword Policy.e. In the center pane, right-click theMinimum password lengthand selectProper±es.f. Enter10as the minimum password length; then clickOK.g. Close the Local Security Policy console.
An AD DS object that has various attributes about a specific network user and is in charge of managing authentication and resource access validation.
To assign a value, you must have the Domain Administrator's rights. If you want to set a minimum password length for all users using Group Policy, you must do so in the default domain policy. If done in other policies, it won't have any impact. In the Default Domain Policy window in the gpmc. msc console, you can view the current password policy settings (on the Settings tab). Additionally, you can use the gpresult command on any domain machine to view the current AD password policy settings.
To learn more about network click the link below:
brainly.com/question/15002514
#SPJ4
The electric field strength between the plates of a simple air capacitor is equal to the voltage across the plates divided by the distance between them. When a voltage of is put across the plates of such a capacitor an electric field strength of is measured. Write an equation that will let you calculate the distance between the plates. Your equation should contain only symbols. Be sure you define each symbol.
The electric field strength between the plates of a simple air capacitor is equal to the voltage across the plates divided by the distance between them. When a voltage of is put across the plates of such a capacitor an electric field strength of is measured. The equation that will let you calculate the distance between the plates is d = V/E
In a parallel plate capacitor, the electric field strength between the plates is given by:
E= V/ d
where
The potential difference is V.
d represents the separation between the plates.
Rearranging the formula yields a new equation that allows us to compute d:
d= V/E
Learn more about distance at https://brainly.com/question/24163277
#SPJ4
. Web applications continue to____________ overtime. It require frequent changes in their structure and functionality.
A. increase
B. reduce
C. evolve
D. transform
Over time, web applications are still evolving. They frequently need to have their structure and functionality changed.
When requirements change frequently, which model is used?The Agile technique should be used if delivery is anticipated quickly and requirements change frequently. The Waterfall approach is most frequently utilized when the requirements are clear and the project is vast.
Why do software specifications alter so frequently?Successful teams must deal with the changing workplace environment since change is an honest fact of progress. Software development requirements might change as a result of both internal problems like flaws and external pressures like a new rival.
To know more about web applications visit:-
https://brainly.com/question/8307503
#SPJ1
Which of the following best describes the existence of undecidable problems? A. Undecidable problems are problems for which more than one algorithm solves the problem and computer scientists have not yet chosen the algorithm they believe is best B. Undecidable problems are problems for which an algorithm can be written that will produce the same output for at least two possible inputs C. Undecidable problems are problems for which an algorithm can be written that produces a correct output for all inputs but in an unreasonable time D. An undecidable problem is a problem for which no algorithm can be constructed that always produces a correct output
An undecidable problem is one that should have a "yes" or "no" response, but for which there is no method that can provide an accurate response for all inputs.
What are two examples of an undecidable problem?A finite-state automaton with no inputs and two counters that can be increased, decreased, and tested for zero is the solution to the Minsky machine's halting problem. Finding the universality of a nondeterministic pushdown automaton: accepting or rejecting all words. Whether a tag system halts is the issue.
Can an ambiguous issue be resolved?Undecidable decision problems are those that permit no algorithmic solution. No computer or computer program of any kind has ever been able to solve an intractable problem. A Turing machine specifically does not exist to resolve an intractable problem.
To know more about undecidable problem visit:-
https://brainly.com/question/21728526
#SPJ4