A point charge q is located at the center of a spherical shell of radius a that has a charge −q uniformly distributed on its surface. Find the electric field for the following points: (a) for all points outside the spherical shell E = keq2/r2 E = q/4πr2 none of these E = keq/r2 E = 0 (b) for a point inside the shell a distance r from the center E = keq2/r2 E = keq/r2 E = 0 E = q/4πr2 none of these

Answers

Answer 1

Answer:

a) E = 0

b) [tex]E = \dfrac{k_e \cdot q}{ r^2 }[/tex]

Explanation:

The electric field for all points outside the spherical shell is given as follows;

a) [tex]\phi_E = \oint E \cdot dA = \dfrac{\Sigma q_{enclosed}}{\varepsilon _{0}}[/tex]

From which we have;

[tex]E \cdot A = \dfrac{{\Sigma Q}}{\varepsilon _{0}} = \dfrac{+q + (-q)}{\varepsilon _{0}} = \dfrac{0}{\varepsilon _{0}} = 0[/tex]

E = 0/A = 0

E = 0

b) [tex]\phi_E = \oint E \cdot dA = \dfrac{\Sigma q_{enclosed}}{\varepsilon _{0}}[/tex]

[tex]E \cdot A = \dfrac{+q }{\varepsilon _{0}}[/tex]

[tex]E = \dfrac{+q }{\varepsilon _{0} \cdot A} = \dfrac{+q }{\varepsilon _{0} \cdot 4 \cdot \pi \cdot r^2}[/tex]

By Gauss theorem, we have;

[tex]E\oint dS = \dfrac{q}{\varepsilon _{0}}[/tex]

Therefore, we get;

[tex]E \cdot (4 \cdot \pi \cdot r^2) = \dfrac{q}{\varepsilon _{0}}[/tex]

The electrical field outside the spherical shell

[tex]E = \dfrac{q}{\varepsilon _{0} \cdot (4 \cdot \pi \cdot r^2) }= \dfrac{q}{4 \cdot \pi \cdot \varepsilon _{0} \cdot r^2 }= \dfrac{q}{(4 \cdot \pi \cdot \varepsilon _{0} )\cdot r^2 }[/tex]

[tex]k_e= \dfrac{1}{(4 \cdot \pi \cdot \varepsilon _{0} ) }[/tex]

Therefore, we have;

[tex]E = \dfrac{k_e \cdot q}{ r^2 }[/tex]


Related Questions

A certain force gives mass m1, an acceleration of 12 m/s² and mass m2 an acceleration of 3.3. m/s². What acceleration will this force give to the combined mass?​

Answers

Acceleration is the rate of change of velocity. Usually, acceleration means the speed is transforming, but not always. When an object moves in a circular path at a steady speed, it is still accelerating, because the focus of its velocity is changing.

a = 4,552 m / s²,   b)  a = 2,588 m / s²

Newton's second law is

F = ma

a = F / m

in this case the force remains constant

indicate us

* for a mass m₁

a₁ = F/m₁

a₁ = 12, m/ s²

* for a mass m₂

a₂= 3.3 m / s²

acceleration  m = m₂-m₁

substitute

[tex]$\begin{aligned}&a=\frac{F}{m_{2}-m_{1}} \\&1 / a=\frac{m_{2}}{F}-\frac{m_{1}}{F}\end{aligned}$[/tex]

let's calculate

1/a=1/3.3 - 1/12  = 0.21969

 a = 4,552 m / s²

a= 4,552m/s²

What is speed and acceleration?

Speed ​​estimates the rate of movement of an object, that is, the distance traveled per unit of time. Acceleration calculates the rate of change of velocity, that is, the change in velocity between two different moments

To learn more about Acceleration, refer

https://brainly.com/question/460763

#SPJ9

Can momentum be negative?
A. No.
B. Yes, if it has a very small mass.
C. Yes, if it is moving very slow.
D. Yes, if it is moving backward.

Answers

Answer:

D

Explanation:

momentum can be negative as it's a vector quantity. positive momentum indicates that the object is traveling in the positive direction as defined by the coordinate system. negative momentum indicates that the object is moving in the opposite direction (backwards). the momentum equation itself is p = mass x velocity.

and only if you consider velocity a a directed vector, can you have a negative momentum. this equation shows that the momentum is in the same direction as velocity.

so, the sign is only for the direction.

the force is the same (going with the absolute value). a negative momentum is not smaller than a positive momentum.

It is possible that momentum can be negative if an object is moving backward. The correct option is D.

A vector quantity called momentum depends on an object's mass and velocity. It is described as the result of the mass and the velocity of an object.

When an item is moving against a selected positive direction, its velocity will be negative since velocity is a vector variable that comprises both magnitude and direction. As a result, the negative velocity will yield a negative value for momentum when it is calculated.

Thus the correct option is D.

For more details regarding momentum, visit:

https://brainly.com/question/30677308

#SPJ6

A boy throws a baseball onto a roof and it rolls back down and off the roof with a speed of 4.05 m/s. If the roof is pitched at 34.0° below the horizon and the roof edge is 2.10 m above the ground, find the time the baseball spends in the air and the horizontal distance from the roof edge to the point where the baseball lands on the ground.

(a) the time the baseball spends in the air (in s)

(b) the horizontal distance from the roof edge to the point where the baseball lands on the ground (in m)

Answers

(a) The time the baseball spends in the air is 0.92 s.

(b) The horizontal distance from the roof edge to the point where the baseball lands on the ground is 3.1 m.

Time spent in air by the baseball

h = vt - ¹/₂gt²

-2.1 = (4.05 x sin 34)t  - ¹/₂(9.8)(t²)

-2.1 = 2.26t - 4.9t²

4.9t² - 2.26t - 2.1 = 0

t = 0.92 s

Horizontal distance traveled by the baseball

R = Vx(t)

R = (4.05 x cos 34)(0.92)

R = 3.1 m

Thus, the time the baseball spends in the air is 0.92 s.

The horizontal distance from the roof edge to the point where the baseball lands on the ground is 3.1 m.

Learn more about horizontal distance here: https://brainly.com/question/24784992

#SPJ1

In 1656, the Burgmeister (mayor) of the town of Magdeburg, Germany, Otto Von Guericke, carried out a dramatic demonstration of the effect resulting from evacuating air from a container. It is the basis for this problem. Two steel hemispheres of radius 0.430 m (1.41 feet) with a rubber seal in between are placed together and air pumped out so that the pressure inside is 15.00 millibar. The atmospheric pressure outside is 940 millibar.
1. Calculate the force required to pull the two hemispheres apart. [Note: 1 millibar=100 N/m2. One atmosphere is 1013 millibar = 1.013×105 N/m2 ]
2. Two equal teams of horses, are attached to the hemispheres to pull it apart. If each horse can pull with a force of 1450N (i.e., about 326 lbs), what is the minimum number of horses required?

Answers

The force required to pull the two hemispheres apart 53696.25N and  the minimum number of horses required is 37 .

( Note: 1 millibar=100 N/m2. One atmosphere is 1013 millibar = 1.013×105 N/m2 )

(1)The contact area between the hemispheres is (π x 0.430²) = 0.5805m²

Pressure difference = (940 - 15) = 925millibars.

(925 x 100) = 92,500N/m^2.

(92500 x 0.5805) = 53696.25N. is the force required to part the hemispheres.

(2)[tex]\frac{53696.25N}{1450N}[/tex] = 37 horses for each side .

37 + 37 = 74 horses will be required.

Force is something which can change the motion of an object, stop it or move it, change its shape or size with it. There are two types of forces, contact forces and non-contact forces. Here, it is a contact force at first, then when the horses come it becomes non-contact force.

Learn more about force here:-

https://brainly.com/question/13191643

#SPJ1

6. Determine the number of significant figure of:
a. 0.2001 b. 2.0000 c. 243 d. 0.00010300​

Answers

Answer:

b

Explanation:

the answer is b because if you do the math it equals to b

How many bytes of memory space are there in an 80 GB hard disk and 256 GB card?​

Answers

Answer:

80GB= 80000000000 bytes

256GB= 274877906944 bytes

Explanation:80GB= 80000000000 bytes

256GB= 274877906944 bytes

A thin flexible gold chain of uniform linear density has a mass of 17.1 g. It hangs between two 30.0 cm long vertical sticks (vertical axes) which are a distance of 30.0 cm apart horizontally (x-axis), as shown in the figure below which is drawn to scale.
Evaluate the magnitude of the force on the left hand pole.

Answers

The magnitude of the force on the left-hand pole is mathematically given as

f'=0.167N

Q=45 degrees

What is the magnitude of the force on the left-hand pole.?

Generally, the equation for Force is  mathematically given as

F=mg/sinФ

Therefore

F(17.1*10^{-3})*9.8/sin 45

F=0.237N

Considering horizontal axis or plane

f'-fcos=0

Therefore

f'=0.237*cos45

f'=0.167N

In conclusion, the slope

tanФ=30/30

tanФ=1

Ф=45

Read more about force

brainly.com/question/13191643

#SPJ1

If you were in a spaceship watching a ball hover at rest (inside the spaceship) in mid-air, and the spaceship suddenly began rapidly accelerating, what would you see happen to the ball? Why?

Answers

Answer:

It will still hover until the spaceship "hits" or exerts a force on it.

Explanation:

Remember, if there is no net force, there is no acceleration or movement.

In this case, our ball is hovering in the spaceship, and in space, we can assume there is no [tex]F_g[/tex], and we can assume there is no [tex]F_N[/tex], nor no forces acting against it.

So, the ball would not move.

However, once the spaceship starts accelerating, the ball would still hover until the spaceship exerts a force on it.

This is because of the same thing as explained above, no forces acting on it, therefore, no acceleration.

Think about it this way.

Imagine you jumped up, then someone threw a ball at you. Now let's imagine you can't move until you hit the floor, meaning that in an ideal situation only  [tex]F_g[/tex] is acting on you. Now again, let's imagine time slows really down for you, but not the ball. Before the ball comes and hits you, you are "hovering" like a ball. But after the ball hits you, you move a little because the ball exerted a force on you.

If you did not understand what I meant above, just forget about it, and think about the fact that if there is a Net force (all the force values added up), then there is acceleration and movement.

A candle 4.75 cm tall is 40.0 cm to the left of a plane mirror.
a) Where is the image formed by the mirror?
- to the right of the mirror
- to the left of the mirror
b) What is the height of this image?
(Express your answer in centimeters.)

Answers

Answer: A candle 4.75 cm tall is 40.0 cm to the left of a plane mirror. Then, the image formed by the mirror will be to the right of the mirror and the height of this image is same as that of the object.

Explanation: To find the answer, we need to know about the reflection at a plane mirror.

What is the reflection at a plane mirror?

There are some points about the reflection at a plane surface.

Distance of image from mirror = distance of object from mirror.Size of the image = size of the object.If object moves with certain velocity, then the image also moves with same velocity in opposite direction.Image formed by a plane mirror will be on the opposite side of the object and which is erect, virtual and laterally inverted.

Thus, we can conclude that, a candle 4.75 cm tall is 40.0 cm to the left of a plane mirror. Then, the image formed by the mirror will be to the right of the mirror and the height of this image is same as that of the object.

Learn more about reflection at a plane surface here:

https://brainly.com/question/28108556

#SPJ4

In response, a plane mirror is 40.0 cm to the left of a candle that is 4.75 cm tall. The mirror's generated image will then be to the right of the mirror and have the same height as the object.

In order to determine the solution, we must understand how a plane mirror reflects light.

What appears in a plane mirror's reflection?There are a few things to note concerning reflections on flat surfaces.The distance of an object from a plane mirror is equal to the distance of its image.Size of the object equals size of the image.If an object moves at a specific speed, the picture will follow suit and move in the opposite direction at the same speed.The other side of the object will have an erect, virtual, and laterally inverted image created by a plane mirror.

As a result, we may say that a flat mirror is 40.0 cm to the left of a candle that is 4.75 cm tall. The mirror's generated image will then be to the right of the mirror and have the same height as the object.

Learn more about reflection at a planar surface here:

https://brainly.com/question/28108556

#SPJ1

The three displacement vectors have magnitude of A=5.00m,B=5.00m and C=4.00m.Find the resultant (magnitude and directional angle) of the three vectors?

Answers

3.00 m is the magnitude of the resultant vector

137.1° is the directional angle of the resultant vector.

1) To find the magnitude of the resultant

Discover each vector's individual components first. 

We must consider the signs of the components because the angles in the figure are measured in various ways. 

In this case, both the y component of vector C and the x component of vector A are negative. 

The vectors' components are as follows, using a little trigonometry:  

Magnitude of A = 5 m

[tex]A_{x}[/tex] = - (5.00m) cos20° = -5 ×0.408 = -4.698 m

[tex]A_{y}[/tex] = + (5.00m)sin20° = +5 × 0.342 = +1.710 m

Magnitude of B = 5m

[tex]B_{x}[/tex] = +(5.00m)cos60° = 5 × 0.5 = +2.5m

[tex]B_{y}[/tex] = +(5.00m)sin60° = 5 × √3/2 = +4.33 m

Cx = 0

Cy = -4.00m

The sum of all three vectors, which we refer to as R, produces components.

Rₓ = Aₓ + Bₓ + Cₓ

   = -4.698 + 2.5 + 0

   = -2.198 m

[tex]R_{y}[/tex] = [tex]A_{y} + B_{y} + C_{y}[/tex]

    = +1.71 +4.33 - 4.00

    = 2.040 m

R = [tex]\sqrt{R_{x^{2} }+R_{y^{2} }[/tex]

  = [tex]\sqrt{(-2.198)^{2 } + (2.040)^{2} }[/tex]

  = 3.00 m

2) To find the directional angle of resultant

tan θ = 2.040/-2.198 = -0.928

θ = -42.9°

Such a vector would be in the so-called "fourth quadrant," as it is well known. However, we discovered that R has a negative x component and a positive y component, indicating that such a vector must reside in the "second quadrant.

The calculator accidentally returned an angle that is 180 degrees off, thus we must add 180 degrees to the naïve angle in order to get the right angle.

Therefore, R's actual direction is determined by-

θ = -42.9° + 180° = 137.1°

Hence, the magnitude of resultant vector is 3.00 m and directional angle is 137.1°

Learn more about Vectors here https://brainly.com/question/17545229

#SPJ1

(b) The particle displacement y of air molecules due to a sound wave is given by y 4m and w = = 0.008 cos wt sin kz. Where k - m 50m rad/s. calculate i. The distance between two consecutive nodes ii. The amplitude after 0.56s​

Answers

The distance between two consecutive nodes and the amplitude after 0.56s are m/2 and 1.75×10^(-4) m respectively.

What's the distance between consecutive nodes of the displacement of air molecules?Wavelength is the distance between two consecutive nodes or toughs or crests or anti-nodes.So, distance between consecutive nodes = wavelength = 2π÷k

= 2π/(4π÷m)

= m/2

What's the amplitude after 0.56s of the displacement of air molecules?

Displacement after 0.56 s = 0.008×cos(50π×0.56s)

=1.75×10^(-4) m

Thus, we can conclude that the distance between consecutive nodes and displacement after 0.56 s are m/2 and 1.75×10^(-4) m respectively.

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: The particle displacement y of air molecules due to a sound wave is given by y=0.008coswtsinkz where k=4π÷m and w=50π rads/s.

Calculate:

I) the distance between 2 consecutive nodes

ii) the amplitude after 0.565s

Learn more about the wavelength here:

brainly.com/question/10750459

#SPJ1

in a motor, what do the combined effect of electric currents and magnetic forced turn electrical energy into?

mechanical energy

a battery

electromagnetic energy

a generator

(please explain too)

Answers

Baba zubi sis. Si is a

The small spherical planet called "Glob" has a mass of 7.88×1018 kg and a radius of 6.32×104 m. An astronaut on the surface of Glob throws a rock straight up. The rock reaches a maximum height of 1.44×103 m, above the surface of the planet, before it falls back down.
1. What was the initial speed of the rock as it left the astronaut's hand? (Glob has no atmosphere, so no energy is lost to air friction. G = 6.67×10-11 Nm2/kg2.)
2. A 36.0 kg satellite is in a circular orbit with a radius of 1.45×105 m around the planet Glob. Calculate the speed of the satellite.

Answers

Answer: The small spherical planet called "Glob" has a mass of 7.88×1018 kg and a radius of 6.32×104 m. An astronaut on the surface of Glob throws a rock straight up. The rock reaches a maximum height of 1.44×103 m, above the surface of the planet, before it falls back down.

1) the initial speed of the rock as it left the astronaut's hand is 19.46 m/s.

2) A 36.0 kg satellite is in a circular orbit with a radius of 1.45×105 m around the planet Glob. Then the speed of the satellite is 3.624km/s.

Explanation: To find the answer, we need to know about the different equations of planetary motion.

How to find the initial speed of the rock as it left the astronaut's hand?We have given with the following values,

                    [tex]m_g=7.88*10^{18}kg\\r_g=6.32*10^4 m.\\h_{max}=1.44*10^3m.\\[/tex]

We have the expression for the initial velocity as,

                    [tex]v=\sqrt{2gh}[/tex]

Thus, to find v, we have to find the acceleration due to gravity of glob. For this, we have,

                  [tex]g_g=\frac{GM_g}{r_g^2} =\frac{6.67*10^{-11}*7.88*10^{18}}{(6.32*10^4)^2} =0.132m/s^2.[/tex]

Now, the velocity will become,

                  [tex]v=\sqrt{2*0.132*1.44*10^3} =19.46 m/s.[/tex]

How to find the speed of the satellite?As we know that, by equating both centripetal force and the gravitational force, we get the equation of speed of a satellite as,

                [tex]v=\sqrt{ \frac{GM}{r}}=\sqrt{\frac{7.88*10^{18}*6.67*10^{-11}}{1.45*10^5 }} =3.624km/s.[/tex]

Thus, we can conclude that,

1) the initial speed of the rock as it left the astronaut's hand is 19.46 m/s.

2) A 36.0 kg satellite is in a circular orbit with a radius of 1.45×105 m around the planet Glob. Then the speed of the satellite is 3.624km/s.

Learn more about the equations of planetary motion here:

https://brainly.com/question/28105768

#SPJ4

1) The rock was moving at 19.46 m/s when it first left the astronaut's palm.

2) A 36.0 kg spacecraft is orbiting the planet Glob in a sphere with a radius of 1.45 105 meters. The satellite is moving at 3.624 km/s at that point.

Understanding the planetary motion equations is necessary in order to determine the solution.

How to determine the rock's original speed when it left the astronaut's hand?The starting velocity's expression is as follows:

                             [tex]v=\sqrt{2gh}[/tex]  

So, in order to determine v, we must determine the acceleration of glob caused by gravity. We already have,

                    [tex]a=\frac{GM}{R^2} =0.132m/s^2[/tex]

The velocity will now change to,

                  [tex]v=\sqrt{2*9.8*0.132} =19.46m/s[/tex]

How can I determine the satellite's speed?As we are aware, the centripetal force and gravitational force are equivalent, and thus leads to the following satellite speed equation:

                        [tex]v=\sqrt{\frac{GM}{R} } =3.624km/s\\where, M=7.88*10^{18}kg[/tex]

Consequently, we can say that

1) The rock was moving at 19.46 m/s when it first left the astronaut's palm.

2) A 36.0 kg spacecraft is orbiting the planet Glob in a sphere with a radius of 1.45 105 meters. The satellite is moving at 3.624 km/s at that point.

Learn more about the planetary motion here:

https://brainly.com/question/28108487

#SPJ1

A golf ball is hit so that it leaves the club face at a velocity of 45m/s at an angle of 40° to the horizontal. by ignoring the effect of air resistance and spin on the ball, use the information to answer the question (a) to (d).
a) Calculate the horizontal component of the velocity
b) Determine the vertical component of the velocity.
c) Find the time taken for the ball to reach its maximum height.
d) Calculate the horizontal distance travelled when the ball is at its maximum height.​

Answers

Answer:a)45cos40 b)45sin40 c) 2.95 d)102

Explanation:

a) [tex]v_{x} = 45 cos40[/tex]

b) [tex]v_{y}=45sin40[/tex]

c) Since air resistance is negligible, the only force acting on the golf ball is gravity. Thus, its vertical acceleration is -g. We know the final velocity must be 0 m/s, because this will be when the golf ball reaches the maximum height and starts to change direction (it falls back to the ground). We also know initial velocity in the vertical direction (see part b). Thus, we can use this equation: [tex]v_{f} = v_{i} + at[/tex].

[tex]0 m/s = 45sin40 + (-9.8m/s^2)t\\t = 2.95s[/tex]

d) The horizontal distance traveled is dependent on (1) how long the ball is in the air and (2) what the horizontal velocity is. (1) was found in part c, and (2) was found in part a.

[tex]x=vt\\x=45cos40(2.95) =102m[/tex]

A thin flexible gold chain of uniform linear density has a mass of 17.1 g. It hangs between two 30.0 cm long vertical sticks (vertical axes) which are a distance of 30.0 cm apart horizontally (x-axis), as shown in the figure below which is drawn to scale.
Evaluate the magnitude of the force on the left hand pole.

Answers

The magnitude of the force on the left-hand pole of the thin flexible gold chain of uniform linear density with a mass of 17.1 and, hangs between two 30.0 cm long vertical sticks, which are a distance of 30.0 cm apart will be, 0.167N.

To find the correct answer, we have to know more about the Basic forces that acts upon a body.

What is force and which are the basic forces that acts upon a body?A push or a pull which changes or tends to change the state or rest, or motion of a body is called Force.Force is a polar vector as it has a point of application.Positive force represents repulsion and the negative force represented attraction.There are 3 main forces acting on a body, such as, weight mg, normal reaction N, and the Tension or pulling force.How to solve the problem?We have given that, the gold chain hangs between the vertical sticks of 30cm and the horizontal distance between then is 30cm.From the given data, we can find the angle  (in the free body diagram, it is given as θ).

                                    [tex]tan\alpha =\frac{30}{30}\\ \alpha =45^0[/tex]

From the free body diagram given, we can write the balanced equations of total force along y direction as,

                                 [tex]y-direction\\T_2sin\alpha =mg\\\\T_2=\frac{mg}{sin\alpha } =\frac{17.1*10^{-3}*9.8}{sin45} \\\\T_2=0.236N[/tex]

From the free body diagram given, we can write the balanced equations of total force along x direction as,

                                 [tex]x-direction\\T_1-T_2cos\alpha =0\\T_1=T_2cos\alpha \\T_1=0.236*cos45=0.167N[/tex]

Thus, we can conclude that, the magnitude of force on the left-hand pole will be 0.167N.

Learn more about the Basic forces that acts upon a body here:

brainly.com/question/28106866

#SPJ1

The force acting on the left-hand pole of a thin, flexible gold chain of uniform linear density weighing 17.1 grams that is suspended between two vertical sticks that are 30.0 cm apart will be 0.167 N in magnitude.

We need to learn more about the fundamental forces that affect a body in order to arrive at the right answer.

What exactly is force, and what are the fundamental forces that affect a body?Force is a push or a pull that modifies or tends to modify the condition, rest, or motion of a body.Given that it has a point of application, force is a polar vector.Repulsion is represented by positive force, and attraction by negative force.A body is subject to three main forces: weight mg, normal response N, and tension or pulling force.How can the issue be resolved?We have given that, the gold chain hangs between the vertical sticks of 30cm and the horizontal space between then is 30cm.We can determine the angle (shown as in the free body figure) using the information provided.

                              [tex]\alpha =tan^{-1}(\frac{30}{30})=45^0[/tex]

We may get the balanced equations for the total force in the y direction from the provided free body diagram as follows:

                                [tex]T_2sin\alpha =mg\\T_2=\frac{mg}{sin\alpha } =0.236N[/tex]

We can create the balanced equations for the total force in the x direction using the provided free body diagram:

                                     [tex]T_1=T_2cos\alpha \\T_1=0.167N[/tex]

Thus, we may infer that the force acting on the left-hand pole will have a value of 0.167N.

Learn more about the tension that acts upon a body here:

https://brainly.com/question/13052160

#SPJ1

The following table lists the speed of sound in various materials. Use this table to answer the question.

Substance Speed (m/s)
Glass 5,200
Aluminum 5,100
Iron 4,500
Copper 3,500
Salt water 1,530
Fresh water 1,500
Mercury 1,400
Hydrogen at 0°C 1,284
Ethyl Alcohol 1,125
Helium at 0°C 965
Air at 100°C 387
Air at 0°C 331
Oxygen at 0°C 316
Sound will travel fastest in air at _____.

-5°C
0°C
10°C
15°C

Answers

Sound will travel fastest in air at 15°C.

Speed of sound in air

The speed of sound in air, given in the range of 100 degrees Celsius and 0 degree Celsius include;

Air at 100°C 387 m/s

Air at 0°C 331 m/s

From the date above, the speed of sound in air increases with increases in temperature. Thus, Sound will travel fastest in air at 15°C.

Learn more about speed of sound here: https://brainly.com/question/2142871

#SPJ1

(These are multiple choice questions)

1) The magnitude of the charge of five electrons is
A. 1.0×10-19 C.
B. 1.6×10-19 C.
C. 6.0×10-19 C.
D. 8.0×10-19 C.

2) Total resistance (in ohms-Ω) between the points A and B of the following circuit is
A. 70 Ω
B. 30 Ω
C. 25 Ω
D. 20 Ω

3) Given the electron configuration of a neutral atom 1s22s22p63s23p5. The atom
A. can become a negative ion easily.
B. is a halogen.
C. has 7 electrons in the outer most shell.
D. all of the above.

4) Identify the number of protons, neutrons and electrons in an atom of
A. 136 protons, 92 neutrons and 92 electrons
B. 92 protons, 136 neutrons and 92 electrons
C. 92 protons, 138 neutrons and 92 electrons
D. 230 protons, 92 neutrons and 92 electrons

5)Which of the following is not an application of Total Internal Reflection?
A. mirage
B. optical fiber
C. prismatic binocular
D. hologram

Answers

The application of total Internal Reflection occurs in a mirage. Option A

What is the charge?

1) We know that a charge can be positive or negative. If the charge is negative, we call it an electron. If the charge is positive, we call it a proton. Now we know that the magnitude of charge on each electron is 1.6×10-19 C. Hence, the magnitude of charge on five electrons = 5 * 1.6×10-19 C = 8.0×10-19 C. Option D

2) The details of question 2 are not shown hence the question can not be answered.

3) Looking at the electronic configuration of the element;  1s22s22p63s23p5, it is clear to see that it has the ns2 np5 outermost configuration that is common to halogens thus it;

can become a negative ion easily. is a halogen.has 7 electrons in the outer most shell.

4) The atom is composed of the protons, neutrons and electrons. Given the nuclide identified as 230/92U we have  92 protons, 138 neutrons and 92 electrons. Option C

5) The application of total Internal Reflection occurs in a mirage. Option A

Learn more about mirage:https://brainly.com/question/8608922

#SPJ1

A lead weight falls from a height of 6 m onto a muddy surface. It comes to rest after penetrating 0.4 cm into the surface. What was the magnitude of the average acceleration during the impact? How long did it take to stop?

(Also can I have like a little explanation :))

Answers

The the magnitude of the average acceleration during the impact is 9.8 m/s² and the time of motion is 1.11 s.

Average acceleration of the lead weight during the impact

The lead weight will fall under the influence of gravity with magnitude of 9.8 m/s².

Time of motion of the lead weight

t = √2h/g

where;

h is the total height of fall, h = 6 m + 0.4 cm = 6.004 mg is acceleration due to gravity

t = √((2 x 6.004)/9.8)

t = 1.11 s

Thus, the the magnitude of the average acceleration during the impact is 9.8 m/s² and the time of motion is 1.11 s.

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

A space craft is moving relative to the earth , an observer on the earth finds that, between 1pm and 2pm according to her clock, 3601 seconds elapse on the space craft clock . What is the space craft speed relative to the earth?c=2.998×10^8ms

Answers

The speed of the space craft relative to the earth is given as: 0.024c. This is solved using the the equation for time dilation.

What is time dilation?

Time dilation is the "slowing down" of a clock as determined by an observer in relative motion with regard to that clock under the theory of special relativity.

The formula is given as :

Δt = [Δr]/ √ 1 - (v²/c²)

Thus,

v = c√1 - (Δr/Δt)²

= c √(1 - (3600/3601)²

v = 0.024c

Learn more about time dilation at:
https://brainly.com/question/1933572
#SPJ1

A 850-kg sports car accelerates from rest to 95 km/h in 6.8 s .
What is the average power delivered by the engine?
Express your answer to two significant figures and include the appropriate units.

Answers

From the calculations, the power expended is 43650 W.

What is the power expended?

Now we can find the acceleration from;

v = u + at

u = 0 m/s

v =  95 km/h or 26.4 m/s

t =  6.8 s

a = ?

Now

v = at

a = v/t

a = 26.4 m/s/ 6.8 s

a = 3.88 m/s^2

Force = ma = 850-kg * 3.88 m/s^2 = 3298 N

The distance covered is obtained from;

v^2 = u^2 + 2as

v^2 = 2as

s = v^2/2a

s = (26.4)^2/2 * 3.88

s = 696.96/7.76

s = 90 m

Now;

Work = Fs

Work =  3298 N * 90 m = 296820 J

Power =  296820 J/ 6.8 s

= 43650 W

Learn more about power expended:https://brainly.com/question/11579192

#SPJ1

A rocket takes off from Earth's surface, accelerating straight up at 69.2 m/s2. Calculate the normal force (in N) acting on an astronaut of mass 87.4 kg, including his space suit. (Assume the rocket's initial motion parallel to the +y-direction. Indicate the direction with the sign of your answer.)

Answers

According to Newton's 3rd law, there will be equal and opposite force on the astronaut which is  -6048 N

What does Newton's third law say ?

The law state that in every action, there will be equal and opposite reaction.

Given that a rocket takes off from Earth's surface, accelerating straight up at 69.2 m/s2. We are to calculate the normal force (in N) acting on an astronaut of mass 87.4 kg, including his space suit.

Let us first calculate the force involved in the acceleration of the rocket by using the formula

F = ma

Where mass m = 87.4 kg, acceleration a = 69.2 m/s2

Substitute the two parameters into the formula

F = 87.4 x 69.2

F = 6048.08 N

According to the Newton's 3rd law, there will be equal and opposite force on the astronaut.

Therefore, the normal force acting on the astronaut is -6048 N approximately

Learn more about forces here: https://brainly.com/question/12970081

#SPJ1

The Lunar Module could make a safe landing if its vertical velocity at impact is 2.8 m/s or less. Use conservation of energy to determine h in each case. The acceleration due to gravity at the surface of the Moon is 1.62 m/s2.
Suppose that you want to determine the greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is zero.
Express your answer to two significant figures and include the appropriate units.
Suppose that you want to determine the greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is 1.7 m/s downward.
Express your answer to two significant figures and include the appropriate units.
Suppose that you want to determine the greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is 1.7 m/s upward.
Express your answer to two significant figures and include the appropriate units.

Answers

(1) The greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is zero is 0.4 m.

(2) The greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is 1.7 m/s downward is 0.25 m.

(3) The greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is 1.7 m/s upward is 0.25 m.

Maximum height

v² = u² - 2gh

where;

v is final velocityu is initial velocity

when the lander's velocity = 0

0 = u² - 2gh

u² = 2gh

h = u²/2g

h = (2.8²)/(2 x 9.8)

h = 0.4 m

when the velocity of the lander is 1.7 m/s downward

h = (u² - v²)/2g

h = (2.8² - 1.7²)/(2 x 9.8)

h = 0.25 m

when the velocity of the lander is 1.7 m/s upward

h = (u² - v²)/2g

h = (2.8² - 1.7²)/(2 x 9.8)

h = 0.25 m

Thus, the greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is zero is 0.4 m.

The greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is 1.7 m/s downward is 0.25 m.

The greatest height h at which the pilot could shut off the engine if the velocity of the lander relative to the surface at that moment is 1.7 m/s upward is 0.25 m.

Learn more about height here: https://brainly.com/question/1739912

#SPJ1

two particles P and Q are shot vertically up. Particle P is first up with a velocity of 40m/s. After 4 seconds, particle Q is also shot up. Find a)where the two particles meet,if at the point of meeting,P has a velocity 15m/s. b ) the velocity with which Q is shot. take g=10m/s^2​

Answers

The velocity with which the particle Q is fired is 15m/s upwards.

What is velocity?

The vector quantity velocity (v), represented by the equation v = s/t, quantifies displacement (or change in position, s) over the change in time (t). Speed (or rate, r) is a scalar number, denoted by the equation r = d/t, that quantifies the distance traveled (d) over the change in time (t).

Assume the upward direction is positive and the downward direction is negative.

Velocity P, = 40m/s

Distance traveled by P,

Using the first equation of motion for particle P,

v = u + at

⇒ 0 = 40 + (-10)t

⇒ t = 4s

This is the time it takes for P to rise

Now, the maximum height(s) reached by the particle P is,

Using the second equation of motion,

s = ut + 1/2at²

⇒ s = 40×4 + 1/2 × (-10) × 4²

⇒ s = 80m

a) A particle P falls when Q is shot after 4 seconds from the initial time:

V² = U² + 2aH₁

⇒ H₁ = 15² - 0/ 2(-10)

⇒ H₁ = 11.25m

Particles P and Q meet at a distance from the ground (H₂).

Height, H₂ = s - H

⇒ H₂ = 80 - 11.25

         = 68.75m

Particles P and Q meet at a distance of 68.75m from the ground.

v = u + at₁

⇒ 15 = 0 + (-10) t₁

⇒ t₁ = 1.5s

It is equal to P's fall time and Q's rise time.

b) For particle Q

H₂ = u₂t₁ + 1/2at₁

⇒ 11.25 = u₂ × 1.5 + 1/2 (-10) × 1.5

⇒ u₂ = 15 m/s

Therefore,

The velocity with which the particle Q is fired is 15m/s upwards.

To learn more about Free Fall under gravity, refer to:

https://brainly.com/question/13299152

#SPJ9

a) Calculate the magnitude of the magnetic field at point P due to the current in the semicircular section of wire shown in the figure (Figure 1). (Hint: Does the current in the long, straight section of the wire produce any field at P?)
Express your answer in terms of the variables I , R , and magnetic constant μ0 .

b) Find the direction of the magnetic field at point P.

Answers

Hello!

a)

To begin, let me first clarify that no section of the wire along the axis of the point 'P' will contribute to the magnetic field (Aka, the straight part of the wire) because the radius vector and current vectors would be parallel.


Now, let's use Biot-Savart's Law:
[tex]dB = \frac{\mu_0}{4\pi }\frac{id\vec{l}\times \hat{r}}{r^2}[/tex]

B = Magnetic field strength (? T)
μ₀ = Permeability of free space (Tm/A)

i = Current in wire ('I' A)
dl = differential length element

r = distance from wire to point P ('R' m, remains constant!)

We can rewrite Biot-Savart as:
[tex]B = \frac{\mu_0}{4\pi } \int \frac{id\vec{l}\times \hat{r}}{r^2}[/tex]

First, let's mind the cross-product.

The angle between the radius vector (Along 'R') and the current vector is ALWAYS 90° since the two vectors are perpendicular along the arc. At a certain point, think about the current as being "tangential" to the differential length and thus perpendicular to the radius.

Therefore, we can disregard the cross-product since sin(90) = 1.

Let's plug in what we already know, replacing 'dl' with 'ds' since this is an arc:

[tex]B = \frac{\mu_0}{4\pi } \int \frac{ids}{R^2}[/tex]

We have a semi-circle, so we are integrating from 0 to π radians.

[tex]B = \frac{\mu_0}{4\pi } \int\limits^{\pi}_{0} {\frac{ids}{R^2}}[/tex]

Simplifying to make the integral easier, we can take constants out of the integral.

[tex]B = \frac{\mu_0i}{4\pi R^2 } \int\limits^{\pi R}_{0} {} \, ds[/tex]

Evaluating:
[tex]B = \frac{\mu_0i}{4\pi R^2} (\pi R- 0) = \boxed{\frac{\mu_0 i}{4R}}[/tex]

b)

Using the current Right-Hand-Rule at the top of the arc, point your thumb to the right. Curl your fingers as if you are gripping the wire over the top and all the way over to the other side of the wire (Where point 'P' would be). Your fingers should point INTO THE PAGE.

If the voltage between 2 plates is 30 V and the electric field strength is 10 V/m, what is the separation distance between the plates?
A. 10 m
B. 2 m
C. 3 m
D. 30 m

Answers

The answer is A because 2 plates is 30v

what is fundamental quantity​

Answers

Answer:

The Fundamental Quantity is a physical quantity that exists independently and cannot be expressed by any other physical quantity.

Explanation:

Examples of these could be : Length, electric current and mass

Hope this helps! :)

In our solar system, which celestial object is known as the dwarf planet?

Answers

Answer:

unfournatletly

Explanation:

i have no clue sorry to waste ur time ill rather not say a answer that will be incorrect.

Answer:

Pluto

Explanation:

Pluto was part of our solar system till 2006In 2006 international scientific committee removed it from planets listIt's known as dwarf planet now

what do u mean by the velocity ratio of lever is four​

Answers

Answer:


VR = Velocity of effort / Velocity of Load

Explanation:

The ratio of the out-lever to the in-lever (length of the resistance arm to effort arm) is known as the velocity ratio (VR). It indicates that the distance covered by effort is four times that covered by the load.

The load-to-effort ratio of a machine, or alternatively, the output-to-input ratio of a machine, is known as its mechanical advantage. Another definition of velocity ratio is the ratio of the velocity of effort to the velocity of load.

When a machine has a force ratio of 4 and a velocity ratio of 4, this indicates that the weight moved is multiplied by 4 and the distance moved by the effort is multiplied by 4 at the same time.

To know more about velocity ratio, visit;

https://brainly.com/question/31378631

#SPJ7

What is formed when 2 or more elements combine chemically

Answers

Answer:

compound

Explanation:

a substance made from two or more different elements that have been chemically joined. Examples of compounds include water (H2O), which is made from the elements hydrogen and oxygen, and table salt (NaCl), which is made from the elements sodium and chloride.

A small object with mass 3.95 kg moves counterclockwise with constant speed 1.65 rad/s in a circle of radius 2.95 m centered at the origin. It starts at the point with position vector 2.95î m. Then it undergoes an angular displacement of 9.10 rad.
(a) What is its new position vector? _____ m
(b) In what quadrant is the particle located and what angle does its position vector make with the positive x-axis? ______ quadrant at _______°
(c) What is its velocity? _____ m/s
(d) In what direction is it moving? _____ ° from the +x direction
(e) What is its acceleration? _____ m/s2
(f) Make a sketch of its position, velocity, and acceleration vectors.

Answers

a)New position vector in vector form= r = 0.233404 î + 2.94056j m

b) Lies in second quadrant at 161.391°

c)Velocity =4.8675 m/s

d)It is moving in a direction making 161.391° with positive x-direction.

e)Acceleration will be centripetal acceleration (8.031 m/s²).

Given:

Mass of the object m = 3.95 kg

ω=1.65 rad/s

Radius of the circle = 2.95 m

a)

new position vector in vector form

=R cos1.65 î  + R sin 1.65 j

= 2.95 cos1.65 î  +2.95 sin1.65 j

= 2.95 x 0.07912 î + 2.95 x 0.9968 j

r = 0.233404 î + 2.94056j

b)

Angular Displacement = θ₀ = 9.10 rad

9.10 radian = 180/π× 9/10 degree

= 521.391°

=521.391°- 360°

=161.391°

This will lie in second quadrant.

Angle made with positive x-axis

=161.391°

c)

Velocity

v = ω R

= 1.65 x 2.95

=4.8675 m/s

d)

It is moving in a direction making 161.391° with positive x-direction.

e)

Acceleration will be centripetal acceleration.

= v²/R

=(4.8675)² / 2.95

=23.6925562 / 2.95

=8.031 m/s²

f) Position, Velocity and Acceleration graph:

Learn more about Angular displacement here:

https://brainly.com/question/17030699

#SPJ1

a) New position vector is r = 0.233404 î + 2.94056j m

b) Lies in second quadrant at 161.391°

c) Velocity =4.8675 m/s

d) It is moving in a direction making 161.391° with positive x-direction.

e) Acceleration will be centripetal acceleration (8.031 m/s²).

Given:

Mass of the object m = 3.95 kg

ω=1.65 rad/s

The radius of the circle = 2.95 m

a) new position vector in vector form

 r =R cos1.65 î  + R sin 1.65 j

 r = 2.95 cos1.65 î  +2.95 sin1.65 j

 r = 2.95 x 0.07912 î + 2.95 x 0.9968 j

 r = 0.233404 î + 2.94056j

b) Angular Displacement = θ₀ = 9.10 rad

9.10 radian = 180/π× 9/10 degree

 = 521.391°

 = 521.391°- 360°

 =161.391°

This will lie in the second quadrant.

Angle made with the positive x-axis =161.391°

c) Velocity

   v = ω R

   v = 1.65 x 2.95

   v = 4.8675 m/s

d) It is moving in a direction making 161.391° with positive x-direction.

e) Acceleration will be centripetal acceleration.= v²/R

   =(4.8675)² / 2.95

   =23.6925562 / 2.95

   =8.031 m/s²

f) Position, Velocity, and Acceleration graph:

Learn more about vector quantity here: https://brainly.com/question/21797532

#SPJ1

Other Questions
Solve the inequality and write the solution in set-builder notation. r - 8 < 7 What is the coefficient of x in the polynomial x 4x 7x 2? Do you think Economics is a Science or not? If it is so.what makes economics science? put the events related to the founding of the united states in the order witch they occurred? The northwest ordinance ratifiedThe federalist papers published The articles of confederation ratified The events of the boston tea party Peter stands at the vertex A of a square ABCD. He can make one step at a time either clockwise or counter-clockwise (the length of the step equals the side-length of the square). In how many ways he can make 8 steps and land at the same vertex A? Choose the answer that best matches the word in italics.When Gerald brought home his rescued dog for the first time, Spot snied around his new domain for hours. bowlfamilytoysterritory unit 8 right triangles and trigonometry homework 7 law of cosines Give me the ummary of thi article, "I it an ant, you wonder, or termite? Ant reemble termite, but they are quite different and can be eaily ditinguihed in contrat to termite, ant are uually dark in Color, are hard bodied, and have contriction between the thorax and abdomen. Termite are light in color and hed their wing. Flying ant do not hed their wing. Alo ant and termite belong to different order So, what is truth? Philosophers have struggled with this question since the dawn of time, perhaps because it's the hardest question ever asked. The field of epistemology is the subdiscipline of philosophy that grapples it, along with the nature of knowledge itself. The interior of an average star is proposed to contain all of the following except aa. conduction zone.b. core.c. radiation zone.d. convection zone. Translate the following arguments into symbolic form. Then determine whether each is valid or invalid by constructing a truth table for each.If national elections deteriorate into TV popularity contests, then smooth-talking morons will get elected. Therefore, if national elections do not deteriorate into TV popularity contests, then smooth-talking morons will not get elected. When benefits are concentrated and costs are diffused:A) resources get wasted on projects with low benefits and high costs.B) fewer projects with low benefits and high costs get developed.C) resources get devoted to projects with high benefits and low costs.D) more projects with high benefits and low costsgetdeveloped. a negative reinforcer ________ the behavior it follows. Who is exempt from gross income tax? I am atempting my math homework but I do not understand this question It says "Vera spent 0.04 of of the earnings on a new phone apps What percent of monthly earnings did she spend on phone apps" Can someone help? can somebody help me I been doing this all day please dont guess its for a testdecide if thee absolute value inequality is an "and" compound inequality, an "or" compound inequality or nether.1. |5+m| You swam 4 sets of 200 yards and your friend swam 5 sets of 150 yards. How many more yards did you swim? D.cotx1+cscxcotx1-cscx= 2 sec xverify step by step find x and mut pleaase Name at least 3 characteristics of other street gangs