Answer:
Cap rocks form the top of reservoirs and create a layer that is impervious to fluid flow By preventing fluids from flowing through it, the fluids are prevented from escaping the reservoir. This applies to oil and gas reservoirs. Oil and gas reservoirs often form in "traps"
Help me!!
Question 5 only!
HELP ME.
Convert 2.5 grams of water into molecules of water.
Answer:
1.5×1024 molecules
Good luck!
What is the relationship of rocks to minerals.
Rocks are minerals.
Minerals are rocks
Minerals are in rocks.
Rocks are in minerals.
Minerals are in rocks.
What information is needed to determine a molecular formula
Answer:
Empirical formulas can be determined from the percent composition of a compound. In order to determine its molecular formula, it is necessary to know the molar mass of the compound. Chemists use an instrument called a mass spectrometer to determine the molar mass of compounds.
Answer:
The empirical formula and the molar mass.
Explanation:
AP3X
What is white light made up of?
A. infrared light
B. ultraviolet light
C. seven colors of the rainbow
Answer:
The answer is C
Explanation:
hope this helps
:)
Answer:
C. Seven colors of the rainbow
Explanation:
when light enters a water droplet and then leaves it again, each different wavelength of light refracts at a slightly different angle. then, when the light is broken up, you can see all of the colors of the rainbow.
For Example, A Dark Tinted Window.
Ca+Cl2-->CaCl2 Then, write balanced half-reactions describing the oxidation and reduction that happen in this reaction.
Answer:
Oxidation half
Ca -----> Ca2+ +2elecyrons
Reduction half
Cl2 + 2electrons ------> 2Cl-
Explanation:
Explain the function of the nucleus, nucleolus, nuclear membrane, chromosomes, ribosomes, cytoplasm, cell membrane, mitochondria, Golgi complex, vacuole, endoplasmic reticulum, cell wall, chloroplast
If 9.87g of As2O3 reacts with carbon, then 7.71g of As should be produced. If only 6.33g of As is actually produced, what is the percent yield of As?
a 82.1%
b 0.821%
c 64.1%
d 0.641 %
Answer:
A
Explanation:
Percent yield= Actual yield/Theoretical yield x 100
The problem tells you that 6.33g of As is produced (actual yield), but 7.71g should be produced (theoretical yield). So 6.33/7.71= 0.821 x 100= 82.1%
Answer:
82.1%
Explanation:
A. I got it right on my test
Why do scientific experiments need to be repeated?
A. Because scientists often make mistakes
B. To ensure that the same results are achieved every time
C. They only need to be repeated if the results are questionable
D. To discourage other scientists from trying to get the same results
Answer:
B
Explanation:
this is called peer review and your results will be stronger
37 grams of H3PO4 ????
Answer:
76 grams is the correct answer to this question
CHAPTER
CHAPTER ASSESSMENT
Understanding Main Ideas (Part A)
In the space at the left, write true if the statement is true; if the statement is false,
change the italicized term to make it true.
1. The overall charge of a formula unit for a compound is never zero.
2. In a crystal lattice, each positive ion is surrounded by negative ions.
3. Delocalized valence electrons are typical of ionic compounds.
4. A sulfate ion contains fewer oxygen atoms than a sulfite ion does.
true
5. Metals tend to be malleable and ductile and to have relatively high
melting points.
6. The more negative the lattice energy is, the stronger is the force of
attraction between the ions of an ionic compound.
7. In naming ionic compounds, the cation is named first.
8. When a metal reacts with a nonmetal, the metal tends to gain electrons.
9. In naming a monatomic anion, the suffix -ide is used.
10. The prefix per- is used in naming the anion with the most oxygen atoms.
Answer:
The answer is in correct
plzzzzzzzzzz help ASAP
Answer:
i think the answer is c because it says that is all they care
The speed of chemical weathering depends on:
water freezing
amount of wind
soil depth
Answer:
Its soil depth
Explanation:
2. What is the molarity of a CuBr2 solution that contains 446 g of solute in 5000 mL of solution?
Answer:
0.4 M
Explanation:
M=moles/Liters
Convert grams to moles (446/223.37=1.99668711)
Convert 5000 mL to liters (5000/1000)
Plug in the values and solve
M=2/5
M=0.4
What must be done to calculate the enthalpy of reaction? Check all that apply. The first equation must be halved. The first equation must be reversed. The second equation must be halved. The second equation must be reversed. The third equation must be halved. The third equation must be reversed. What is the overall enthalpy of reaction? Delta.Hrxn = kJ
The overall enthalpy of the reaction has been obtained by reversing the second equation, and third equation must be halved. Thus, option D and E has been correct.
The complete reactions given in the question has been:
[tex]\rm C\;+\;O_2\;\rightarrow\;CO_2\\2\;CO\;+\;O_2\;\rightarrow\;2\;CO_2\\2\;H_2O\rightarrow\;2\;H_2\;+\;O_2[/tex]
The overall reaction has been:
[tex]\rm C\;+\;H_2O\;\rightarrow\;CO\;+\;H_2[/tex]
To obtain the overall enthalpy of the reaction, the intermediate reaction enthalpy has been arranged to give the overall equation.
The first equation has been in the correct sequence for the final reaction.
The second equation has been in in the same order to obtain the overall reaction. The CO has been the product, while carbon dioxide has been the reactant from equation 1. Thus, equation 2 has been reversed.
The third equation has 2 moles of water while the overall reaction has 1 mole of water. Thus, equation third has been halved.
Thus, to obtain the enthalpy of overall final reaction, the second equation must be reversed, and third equation must be halved. Thus, option D and E has been correct.
For more information about the enthalpy of reaction, refer to the link:
https://brainly.com/question/1657608
What must be done to calculate the enthalpy of reaction? Check all that apply.
The first equation must be halved.
The first equation must be reversed.
The second equation must be halved.
✔️ The second equation must be reversed.✔️ The third equation must be halved. ✔️ The third equation must be reversed.What is the overall enthalpy of reaction?
ΔH[tex]rxn[/tex]= ✔️131.3 kJ
1 point
If the element Lithium (Li) were to bond with the element Sulfur (s), what
type of bond can you predict will be formed and why?*
A. Covalent-Li and S are two nonmetals
B. Covalent-Li is a metal and S is a nonmetal
C. Ionic-Li and S are two nonmetals
D. Ionic-Li is a metal and S is a nonmetal
Answer:
C. Ionic-Li and S are two nonmetals
Na * 6.02 * 10^23 pls help an it got to include na
Answer:
6.02E23Na
Explanation:
you just convert the element to a decimal form
PLEASE HELP WILL MARK BRAINLY
1. If a cube has 2cm sides and a mass of 10 g, what would it's density be?
A. 0.8 g/cm3
B. 1.25 kg
C. 1.25g/cm3
D. None of the above
2.If a cube has sides of 1.5 cm, and a mass of 15 g, would it float or sink in water?
A. float
B. Sink
3. A material with a melting point of 25C would be a solid at 15C?
A. True
B. False
4. A material with a Chemical Symbol of CO is an element.
A. True
B. False
Answer:magine 2 cubes. ... One cube is made out of gold and has a mass of 19.3 grams. ... Gold has a density of 19.3 grams per cubic centimeter, that is, 19.3 g/cm3 or 19.3 g cm-3 ... If you weigh 1.00 mL of liquid water it will have a mass of about 1 g so its ... They are both less dense than water so they will also float on top of water .
Explanation:
why do the properties of a material determine the use of the material?
Answer:
Matter is made up of particles whose properties determine the observable characteristics of matter and its reactivity.
Explanation:
Look at the diagram below.
(+
When this atom becomes an ion, it will
(gain, lose)
electrons. The charge of this ion will be
Answer:
gain electrons
charge will be 4-
What is the electron configuration for an Atom that has 13 electrons
48g of methane was burned in an excess of air. What mass of carbon dioxide would be produced in the reaction assuming complete combustion? Use the information below to answer the question.
Answer:
132g
Explanation:
CH4= 12+4=16
moles= m/Mr moles=48/16=3 mol
CO2= Mr=44
there are the same number of moles as methane:
Mass= Mrxmoles
44x3=132g
The mass of the carbon dioxide produced by the combustion of the 48 g of methane is equal to 132 g.
What is the combustion reaction?Combustion reaction involves the complete oxidation of the hydrocarbon such reactions generally release only carbon dioxide and water as products.
A hydrocarbon undergoes combustion to produce carbon dioxide and water as the product. No other side products are formed in the combustion reaction.
The given combustion reaction of the methane can be written as follows:
CH₄ + 2 O₂ → CO₂ + 2H₂O
Given the amount of methane for combustion = 48 g
The molar mass of methane = 16g/mol
The molar mass of the carbon dioxide, CO₂ = 44g/mol
16 grams of methane produce carbon dioxide = 44g
The 48 grams of methane will produce CO₂ = (44/16) ×48 = 132 g
Therefore, the mass of 132 g of carbon dioxide is produced by the combustion of 48g of methane.
Learn more about combustion reactions, here:
brainly.com/question/12172040
#SPJ2
Fe(OH)2+HCI--> FeCl2+H2O balanced
Answer:
Fe(OH)2 + 2HCl ---> FeCl2 + 2H2O
I think
responsible for bring messages from the sensory
organs to the brain. ?
A: Skeletal
B: Sensory
C: Motor
D: Axial
Answer:
motor nerves
Explanation:
sensory produces while motor transports
Dominant genes are represented with lowercase letters while recessive genes are represented with capital letters.
1. True
2.False
Answer:
True
Explanation:
The shade or pigment of a mineral is known as
Luster
Hardness
Density
Streak
O Color
Answer:
Streak
Explanation:
The streak of a mineral is the color of the powder produced when it is dragged across an un-weathered surface.
plzzzzzzzzzzzzz help me
Answer: omnivores
Explanation:
I just know
Which of the following is an example of a chemical element a. Salt B.water c.sugar d.sodium
Answer:
the answer is sodium
Explanation:
hope this helps
The atoms in a sample are close together but can side past one another. As the atoms lose energy, they move slower. The atoms become locked in place because of attractive forces between them.
Which change of state is taking place
Gas to solid
Gas to liquid
Liquid to solid
Solid to liquid
Which unit is used for measuring atomic mass?
Answer: Amu
Explanation: