Psolvent = X Solvent x Po Psolute = X x Po Psolvet =(1-X ) x Po Delta P = Po Solvent-Psolvent = X x Po Complete the subscript on the following equations above with: Solution or Solvent or Solute

Answer:

Tobacco use

Explanation:

Smoking causes cancer, heart disease, stroke, lung diseases, diabetes, and chronic obstructive pulmonary disease (COPD), which includes emphysema and chronic bronchitis. Smoking also increases risk for tuberculosis, certain eye diseases, and problems of the immune system, including rheumatoid arthritis

Answer:

c. Tabaco use

Explanation:

Answer: The ground state electronic configuration of an atom having atomic mass number 37 and number of neutrons 20 is [tex]1s^22s^22p^63s^23p^5[/tex]

Explanation:

Atomic number is equal to the number of protons.

Mass number is the sum of number of neutrons and number of protons.

Mass number =  number of neutrons + number of protons

37 = 20 + number of protons

number of protons = 17

The atomic number is specific to an element, and the element with atomic number 17 is chlorine.

Electronic configuration represents the total number of electrons that a neutral element contains.

[tex]Cl:17:1s^22s^22p^63s^23p^5[/tex]

Answer:

metal can hold heat keep it near fire

Cl2 = 70.9 g/mol

=

[tex]21.4 \: mol \times \frac{70.9 \: g}{1 \: mol} = 1517.26 \: g[/tex]

Answer:

0.25L or 250Ml

Explanation:

I am not that good but as far as my calculations this must be the answer

Answer: c. so that you use the correct energy states

Explanation:

Enthalpy is the energy release or energy produced when a chemical reaction is carried out.

Enthalpy change is calculated by substracting the energy of reactants from the energy of products.

[tex]\Delta H=H_{products}-H_{reactants}[/tex]

As the energies are different for different states and thus the correct stale symbols in your balanced chemical equation must be given so that we use the correct energy values.

kelvin

hope that helps^^

Answer:

The answer is below

Explanation:

Newton's second law of motion states that the force applied to an object is directly proportional to the rate of change of momentum with respect to time, going in the same direction as the force.

Let F = force, m = mass of object, v = velocity of object, mv = momentum.

F = d/dt(mv) = m(dv / dt) = ma; a = acceleration.

Let us assume that the object starts from rest to 5 m/s within 1 seconds, hence:

F = m(dv / dt)

200 N = m[(5 m/s - 0 m/s) / (1 s)]

200 = 5m

m = 40 kg

Answer:

It is A

Explanation:

Answer:

6.31x10^-10

Explanation:

Answer: 6.31 x 10^-10

Explanation:

Answer:

If nitrogen = 30.4% then oxygen = 100-30.4 = 69.6%

divide each % value by atomic mass

N = 30.4/14 = 2.17

O = 69.6/16 = 4.35

Divide each y smaller:

N = 2.17/2.17 = 1

O = 4.35/2.17 = 2

Explanation:

"The empirical Formula will be [tex]NO_{2}[/tex]."

What is empirical formula?

In chemistry, an empirical formula is the simplest thought of the entire number quantity of atoms in a molecule.

It is given that N = 30.4%.

The % of O can be determined as: 100-30.4%= 69.65.

Now, after dividing % value with atomic mass, we get.

Mass of  N= 14 and Mass of O = 16.

N= 30.4/14= 2.17

O = 69.6/ 16= 4.35

It can be seen that N has less number as compared to O . So, divide each with 2.17.

N= 2.17/2.17 = 1

O = 4.35/2.17=2

So the empirical formula will be [tex]NO_{2}[/tex].

To know more about empirical formula click here.

https://brainly.com/question/21280037.

#SPJ2

Answer:

3SiO2  +  2CaC2 ------>   3Si  +   2CaO  +  2CO2

Explanation:

Answer:

4 I believe is false and 5 is D I think

Answer:

4.) A. (TRUE)

5.) B. (THE WEATHER AND CLIMATE)

Explanation:

I HOPE IT HELPS YOU;)

Answer:

Isotopes

Explanation:

Isotopes are atoms of the same element that contain an identical number of protons, but a different number of neutrons. Despite having different numbers of neutrons, isotopes of the same element have very similar physical properties.

= 0.2+560.66JK-2eF

use this app : Photomath

It will help you :)

Answer:

m = 32.34 pounds of ice.

Explanation:

In this case we need to use the following expression of heat:

q = m * ΔHf   (1)

Where:

q: heat absorbed in J or kJ

m: mass of the compound in g

ΔHf: heat of fusion of the water in kJ/g

We are asked to look for the mass of ice in pounds, so after we get the grams, we need to convert the grams to pounds, using the following conversion:

1 pound --------> 453.59 g   (2)

So, we have the heat and heat of fusion, from (1) let's solve for the mass, and then, using (2) the conversion to pounds:

q = m * ΔHf  

m =  q / ΔHf

m = 4900 / 0.334 = 14,670.66 g of ice

Now, the conversion to pounds:

m = 14,670.66 g * 1 pound/453.59 g

Hope this helps  

Answer:

That's simple it's the caca of 54 32 x (5) b ÷ 5683jvl done so your answer is 0

Answer:

high

Explanation:

Answer:(A)

Explanation:

Answer:

Final temperature = 152.57K,

Pressure = 0.6907 bar.

dT/dt = - 1,151 K/s.

Explanation:

The first thing to do here is to write out the equation for mass balance as given below:

dN/dt = N -------------------------------------------------------------------------------------------(1).

N = P/T, then, substitute the values given in the question into:

d[p/T]/ dt = [- 4.5/28 × 8.314]/0.15 = - 8.9 × 10⁻⁵ bar/K.s.

Thus, there is the need to integrate, Integrate [p/T]f = 10/320 - 8.9 × 10⁻⁵ bar/K.s. ------------------------------------(2).

NB; fT = final temperature, fP = final pressure and iT = initial temperature.

Also, [ fT]³⁰/₈.₃₁₄/ [fP] = [iT]³⁰/₈.₃₁₄/ Pi] = [ 320]³⁰/₈.₃₁₄/ 10.

Therefore, [fT]³⁰/₈.₃₁₄ = 109.52 × 10⁶.

Final temperature=  [fP]³⁰/₈.₃₁₄ × 169.05.

Note that fP/ [fP]³⁰/₈.₃₁₄ × 169.05 = 10/320 - 8.9 × 10⁻⁵.

Therefore, [fP]¹ ⁻ ³⁰/₈.₃₁₄ = 0.7651.

Hence, Final temperature = 152.57K,

Pressure = 0.6907 bar

dT/ dt = N[RT]² / Cv . PV.

R = 30 - 8.314 = 21.86 J/mol K.

Then, the rate of change of the gas temperature at this time = dT/dt = - 1,151 K/s.

Answer:

The [OH⁻] of a solution that has a pOH of 2.7 will be 2*10⁻³

Explanation:

The pOH (or potential OH) is a measure of the basicity or alkalinity of a solution.

pOH indicates the concentration of hydroxyl ions [OH-] present in a solution. In this way, pOH is defined as the negative logarithm of the activity of hydroxide ions, that is, the concentration of OH- ions:

pOH= -log [OH⁻]

In this case, pOH has a value of 2.7. Replacing:

2.7= -log [OH⁻]

and solving:

[OH⁻]=10⁻² ⁷

you get:

[OH⁻]≅ 2*10⁻³

The [OH⁻] of a solution that has a pOH of 2.7 will be 2*10⁻³

Answer:

Limiting reactants or limiting reagents decide the amount of product formed and the amount of excess reagent used.

Answer:

mineral acids are obtained from one or more inorganic compounds which is a compound that lacks carbon and hydrogen bonds. Inorganic compound examples include water and carbon dioxide. Something all mineral acids do is form hydrogen ions and the joined together bases when it is dissolved  in water.

Explanation:

Answer: Metallic bonding is a type of chemical bonding and is responsible for several characteristic properties of metals such as their shiny lustre, their malleability, and their conductivities for heat and electricity. Both metallic and covalent bonding can be observed in some metal samples

PLEASE MARK ME BRAINLIST

Electrons move freely among positively charged ions. This is the characteristics of a metallic bond. Therefore, the correct option is option B.

Valence electrons in a metallic link are not bound to a specific pair of atoms, but rather travel freely among a "sea" of positively charged metal ions. These electrons are not assigned to any specific atom and are shared by all metal ions in the metallic lattice.

The electron sea model depicts the valence electron arrangement as a "sea" of negatively charged electrons encircling positively charged metal ions. Metals have strong electrical and thermal conductivity due to electron mobility.

Therefore, the correct option is option B.

To know more about metallic bonding, here:

https://brainly.com/question/29766835

#SPJ4

Answer:

The answer is 3.011x^24 marbles

Explanation:

6.022 x 10^23 x 5 = 3.011 x 10^24

Answer:

Uses of Sodium chloride:

1.it is used as table salt in our diets

2. it is used as a food preservative

3. It is used as an industrial source of sodium and chlorine

Uses of Sodium hydroxide:

1. It is in the laboratory as an alkali in the neutralization of acids

2. It is used in the manufacture of soap

3. It is used in the refining of petroleum

Uses of Sodium carbonate:

1. It is used in the manufacture of detergents and glass

2. It is used to soften hard water

3. it is used to standardize acids in the laboratory

Uses of Sodium sulphate

1. It is used in the manufacture of detergents and glass

2. It is used as a purgative

3. It is used to treat wood-pulp for paper making.

Uses of Potassium nitrate

1. It is used in making gunpowder

2. It is used as rocket propellant

3. It is used in making fertilizer

Uses of Potassium chlorate

1. It is used as an oxidizer

2. It is used in making explosives

3. it is used as a disinfectant

Uses of Potassium permanganate (vii)

1. It is used as an oxidizing agent

2. It is used as a disinfectant

3. It is used as an analytical reagent

Uses of Potassium chloride

1. It is used for the manufacture of fertilizer

2. It is used as an alternative salt to sodium chloride

3. It is used in medicine to treat low blood pressure

2. Potassium nitrate and potassium chloride are used in the manufacture of fertilizers.

Potassium nitrate is used in fertilizers because it provides two important plant nutrients, nitrogen and potassium to plants.

Potassium chloride (potash)  is used in fertilizers because it efficiently deliver the important plant nutrient, potassium, to plants.

Explanation:

Uses of Sodium chloride:

1. it is used as table salt in our diets

2. it is used as a food preservative

3. It is used as an industrial source of sodium and chlorine

Uses of Sodium hydroxide:

1. It is in the laboratory as an alkali in the neutralization of acids

2. It is used in the manufacture of soap

3. It is used in the refining of petroleum

Uses of Sodium carbonate:

1. It is used in the manufacture of detergents and glass

2. It is used to soften hard water

3. it is used to standardize acids in the laboratory

Uses of Sodium sulphate

1. It is used in the manufacture of detergents and glass

2. It is used as a purgative

3. It is used to treat wood-pulp for paper making.

Uses of Potassium nitrate

1. It is used in making gunpowder

2. It is used as rocket propellant

3. It is used in making fertilizer

Uses of Potassium chlorate

1. It is used as an oxidizer

2. It is used in making explosives

3. it is used as a disinfectant

Uses of Potassium permanganate (vii)

1. It is used as an oxidizing agent

2. It is used as a disinfectant

3. It is used as an analytical reagent

Uses of Potassium chloride

1. It is used for the manufacture of fertilizer

2. It is used as an alternative salt to sodium chloride

3. It is used in medicine to treat low blood pressure

2. Potassium nitrate and potassium chloride are used in the manufacture of fertilizers.

Potassium nitrate is used in fertilizers because it provides two important plant nutrients, nitrogen and potassium to plants.

Potassium chloride (potash)  is used in fertilizers because it efficiently deliver the important plant nutrient, potassium, to plants.

Answer:

Hehe I don't know spanish -

Explanation:

Answer:

what's this? s*it fellow

uska dil ker raha tha isleye