The dot plots below show the number of students in attendance each day in Mr. Wilson's class and Mr. Watson's class in April. What is the difference of the medians as a multiple of the interquartile range? A. B. C. D.

Rounding to four decimal places, the answer is 0.8926. So the probability that at least one of the ten college students has not taken a mathematics course is approximately 0.8926.

what is probability?

Probability is a measure of the likelihood or chance that a particular event will occur. It is usually expressed as a number between 0 and 1, where 0 represents an impossible event and 1 represents a certain event.

The probability that a college student has taken a mathematics course is 0.80. Therefore, the probability that a student has not taken a mathematics course is

1 - 0.80 = 0.20.

The probability that at least one of ten college students has not taken a mathematics course can be found using the complement rule. That is, the probability that at least one student has not taken a mathematics course is equal to one minus the probability that all ten students have taken a mathematics course.

The probability that all ten students have taken a mathematics course is:

0.80¹⁰ = 0.1074

Therefore, the probability that at least one student has not taken a mathematics course is:

1 - 0.1074 = 0.8926

Therefore, Rounding to four decimal places, the answer is 0.8926. So the probability that at least one of the ten college students has not taken a mathematics course is approximately 0.8926.

To learn more about from probability from the given link:

https://brainly.com/question/30034780

#SPJ1

The least important value to today's college students according to the yearly values survey is Political involvement. So the option B is correct.

The survey found that only 32% of college students believed that political involvement was important. This is significantly lower than the other values surveyed such as Financial Success (86%) and Community Involvement (71%). As such, it can be concluded that Political Involvement is the least important value to today's college students.

This may be due to a variety of factors, such as a lack of understanding of the political system, a lack of interest in politics, or a sense that individual political action will not make a difference.

It is important to recognize, however, that political involvement is still an important part of civic engagement and an essential part of the democratic process. As such, college students should strive to become more informed about politics and to find ways to get involved in the political process.

To learn more about Political involvement link is here

brainly.com/question/28943809

#SPJ4

The complete question is:

Which of the following values, which is least important to today's college students according to the yearly values survey?

A. Career success

B. Political involvement

C. Healthy lifestyle

D. Social media presence

Answer:

57

57

123

123

57

57

123

that's all.

Answer:

m<1 = 57°

m<2 = m<1 = 57°

m<3 = x = 123°

m<4 = x = 123°

m<5 = m<1 = 57°

m<6 = m<5 = 57°

m<7 = m<4 = 123°

Step-by-step explanation:

[tex]{ \tt{m \angle 1 + x = 180 \degree}} \\ { \colorbox{silver}{corresponding \: angles}} \\ { \tt{m \angle 1 = 180 - 123}} \\ { \tt{ \underline{ \: m \angle 1 = 57 \degree \: }}}[/tex]

Yes, the apparent under representation of Hispanics on the jury duty calls into question the fairness of the jury selection system, as the results of the hypothesis test suggest that the system may be systematically excluding Hispanics.

To determine whether the apparent underrepresentation of Hispanics on the jury selection system is statistically significant and calls into question its fairness, we need to perform a hypothesis test.

First, we set up the null hypothesis, which is the assumption that there is no difference between the proportion of Hispanics in the county population and the proportion of Hispanics in the jury pool. That is, the proportion of Hispanics in the jury pool is expected to be equal to 19%.

The alternative hypothesis is that there is a difference between the proportion of Hispanics in the county population and the proportion of Hispanics in the jury pool.

We can use a one-tailed z-test to test the null hypothesis, where the test statistic is calculated as:

z = (p - P) / sqrt(P(1-P)/n)

where p is the proportion of Hispanics in the jury pool, P is the proportion of Hispanics in the county population (0.19), and n is the sample size (72).

Plugging in the values, we get

z = (9/72 - 0.19) / sqrt(0.19*(1-0.19)/72) = -2.39

Assuming a significance level of 0.05, we compare the calculated z-value with the critical z-value of -1.645 (obtained from a standard normal distribution table). Since the calculated z-value is less than the critical z-value, we reject the null hypothesis and conclude that the proportion of Hispanics in the jury pool is significantly different from the proportion of Hispanics in the county population.

Learn more about hypothesis test here

brainly.com/question/30588452

#SPJ4

If a relation R is an equivalence relation, then R will be circular.

If a relation R is an equivalence relation, then it must satisfy three properties: reflexivity, symmetry, and transitivity.

(i) Reflexivity: For any element "a" in the set, "aRa" must be true.

(ii) Symmetry: For any elements "a" and "b" in the set, if "aRb" then "bRa" must be true.

(iii) Transitivity: For any elements "a", "b", and "c" in the set, if aRb and bRc then "aRc" must be true.

A Circular relation is where "aRb" and "bRc" imply "cRa".

This is a stronger condition than the transitivity property of an equivalence relation, which only requires that "aRb" and "bRc" together imply "aRc".

Therefore, a relation that is an equivalence-relation have to be circular.

Learn more about Relation here

https://brainly.com/question/30881906

#SPJ4

The given question is incomplete, the complete question is

A relation R is called circular if "aRb" and "bRc" imply that "cRa". if R is an equivalence relation, then would R be circular?

The solution to the system of equations is (x, y) = (-4, 12) or (3, 5).

simultaneous equations, or system of equations Two or more equations in algebra must be solved concurrently (i.e., the solution must satisfy all the equations in the system). The number of equations must match the number of unknowns for a system to have a distinct solution. Even then, a solution is not assured.

We can solve this system of equations by substitution or elimination. Here, we will use substitution:

Substitute y in the first equation with its expression from the second equation:

x + (x^2 - 4) = 8

Now, we have a quadratic equation in x:

x^2 + x - 12 = 0

Factor the quadratic equation:

(x + 4)(x - 3) = 0

So, either x + 4 = 0 or x - 3 = 0:

x = -4 or x = 3

Substitute each value of x into either equation to find the corresponding value of y:

If x = -4, then y = (-4)^2 - 4 = 12

If x = 3, then y = 3^2 - 4 = 5

Therefore, the solution to the system of equations is (x, y) = (-4, 12) or (3, 5).

To know more about system of equations visit:

https://brainly.com/question/21620502

#SPJ1

Answer: A matrix A of dimension n x n is called invertible if and only if there exists another matrix B of the same dimension, such that AB = BA = I, where I is the identity matrix of the same order.

Step-by-step explanation:

hope it helped! <3

Answer:

A = 32

Step-by-step explanation:

A= (a+b divided by 2) mulitiplied by height

a = 6

b = 2+6+2 = 10

h = 4

a+b = 6 + 10= 16

16 divided by 2 = 8

8 x 4 = 32

Therefore, the area is 32.

Answer:

A

Step-by-step explanation:

because___________________________________

Answer:

B) True

Step-by-step explanation:

SSS or Side-Side-Side is used to prove two triangles are congruent.

The scale factor of dilation of the shaded in gray to the shaded in black is 3

Given that

The preimage = shaded in gray

The image = shaded in black

From the graph, we have the following values on the image and the preimage

The preimage = shaded in gray = 4

The image = shaded in black = 12

The scale factor of dilation is then calculated as

Scale factor = shaded in black/shaded in gray

So, we have

Scale factor = 12/4

Evaluate

Scale factor = 3

Hence, the scale factor dilation is 3

Read more about scale factor at

https://brainly.com/question/29229124

#SPJ1

The measurement of angle PCD in equilateral triangle  is 67.38°.

Let $s$ be the side length of the square $abcd$, and let $O$ be the center of the square. Then $OP = s/\sqrt{2}$.

Since triangle $ABP$ is equilateral, we have $\angle ABP = 60^\circ$ and $AP=BP=s$. Let $E$ be the foot of the perpendicular from $P$ to $AB$. Then $AE=BE=s/2$ and $EP=s\sqrt{3}/2$.

Since $EP$ is perpendicular to $AB$ and $AB$ is parallel to $CD$, we have $\angle PCD = \angle ACE$.

Since $OP$ is perpendicular to $AB$, we have $\angle OEP = \angle AEP = 30^\circ$. Also, $OE=OP/\sqrt{2}=s/2$.

Using the Pythagorean theorem in triangle $OCE$, we have

CE= [tex]\sqrt{(OE)^{2} + (OC)^{2}} = \sqrt{(s/2)^{2} + s^{2}} = s\sqrt{5}/2[/tex]

Therefore, $\sin \angle ACE = CE/CP = \sqrt{5}/2$. Thus,

∠PCD = ∠ACE = arcsin(√5/2) ≈ 67.38°

To know more about equilateral triangle:

https://brainly.com/question/3461022

#SPJ4

The inequality is X > 0 and a word sentence represent the graph is  X  the graph of a number line with an open circle on zero and an arrow pointing to the right.

The inequality X > 0 represents the graph of a number line with an open circle on zero to left and an arrow pointing to the right. This means that any value of X that is greater than zero is a valid solution for the inequality.

In other words, X can be any positive number, such as 1, 2, 3, and so on. However, X cannot be zero or any negative number, as those values do not satisfy the inequality. Therefore, the word sentence that represents this inequality is "X is greater than zero."

This means that X must be a positive number, and it can be any value that is greater than zero.

To know more about inequality:

https://brainly.com/question/30228778

#SPJ4

The approximate volume of a human head is 4000 cubic centimeter.

A sphere is simply a geometrical object that is a three-dimensional analogue to a two-dimensional circle.

The circumference of a sphere is given by the formula:

C = 2πr

Where r is the radius of the sphere. In this case, we are given that the circumference of the sphere (which approximates the human head) is 60 cm, so:

60 cm = 2πr

Solve for r

r = 60/2π

r = 30/π

The volume of a sphere is given by the formula:

V = (4/3)πr³.

Substituting the value we found for r, we get:

V = (4/3) × π × ( 30/π )³

V = (4/3) × π × ( 30/π )³

V = 3647.566 cm³

V = 4000 cm³

Therefore, the volume to the nearest 1,000 cubic cm is 4000 cm³.

Learn more about volume of sphere here: https://brainly.com/question/27933834

#SPJ1

The value of the variable, x, obtained using the formula for the perimeter of a sector of a circle is; x = 6 cm

A sector of a circle is the region of the circle that has two radii of the circle and the arc between the two radii as the boundary of the region.

The perimeter of a sector of a circle can be obtained using the formula;

Perimeter = 2·r + (θ/360°) × (2·π·r)

The radius of sector OAD, r = 6 cm

Therefore;

The perimeter of sector OAD = 2 × 6 + (50/360) × 2 × π × 6 = 12 + 5·π/3

The perimeter of sector OBC = 2 × The perimeter of sector OAD

Therefore;

The perimeter of sector OBC = 2 × (12 + 5·π/3) = 24 + 10·π/3

Which indicates;

The perimeter of sector OBC = 2  × (6 + x) + (50/360) × 2 × π  × (6 + x)

2  × (6 + x) + (50/360) × 2 × π  × (6 + x) = (5·π·x + 30·π + 36·x + 216)/18

24 + 10·π/3 = (5·π·x + 30·π + 36·x + 216)/18

432 + 60·π = 5·π·x + 30·π + 36·x + 216

432 - 216 + 60·π - 30·π  = x·(5·π + 36)

216 + 30·π = x·(5·π + 36)

6 × (5·π + 36 ) = x·(5·π + 36)

x·(5·π + 36) = 6 × (5·π + 36 )

x = 6 × (5·π + 36 )/(5·π + 36 ) = 6

x = 6 cm

Learn more on the sector of a circle here: https://brainly.com/question/9790386

#SPJ1

According to the problem the answer is cos 9 = sin 56.3.

Cos is a mathematical function that returns the ratio of the side adjacent to a given angle of a right triangle to the hypotenuse of the triangle. It is one of the most commonly used trigonometric functions and is used in various mathematical calculations such as finding angles, distances, and wave lengths. Cos is often written as cosine and is typically abbreviated as "cos." It can also be written as COS or csc. Cos is typically used in conjunction with sin and tan to measure angles and distances in a triangle. Cos can also be used to calculate wave lengths in physics and to determine the magnitude of a vector in vector calculus. Cos is an important concept in mathematics and is used in many areas of science, engineering, and technology.

Use the identity sin(90°-x) = cos x:

sin 56.3 = cos (90° - 56.3)

cos 9 = cos (90° - 56.3)

To learn more about cos

https://brainly.com/question/29253810

#SPJ1

For cos 9°, angle lies between 0° and 90° (First Quadrant). Since cosine function is positive and in the first quadrant, thus cos 9° value = 0.9876883. Also Cos 9 = √(1-sin²(9°)).

Cos is a mathematical function that returns the ratio of the side adjacent to a given angle of a right triangle to the hypotenuse of the triangle. It is one of the most commonly used trigonometric functions and is used in various mathematical calculations such as finding angles, distances, and wave lengths. Cos is often written as cosine and is typically abbreviated as "cos." It can also be written as COS or csc.

The value of cos 9 degrees in decimal is 0.987688340, since Cos 9 degrees can also be expressed using the equivalent of the given angle (9 degrees) in radians (0.15707)

Using degree to radian conversion, θ in radians is:

= θ in degrees × (pi/180°)

⇒ 9 degrees

= 9° × (π/180°) rad

= π/20 or 0.1570

∴ cos 9° = cos(0.1570)

= 0.9876883

Since the cosine is the periodic function, we can represent cos 9° as,

So, cos 9 degrees = cos(9° + n × 360°).

⇒ cos 9°

= cos 369°

= cos 729°, and so on.

Cos 9 = √(1-sin²(9°))

To learn more about cosine function, visit

https://brainly.com/question/17954123

#SPJ1

To make a rectangle with a rotation symmetry of order 2, first draw the rectangle on a piece of paper. Then draw a cross in the middle of one of the squares in the rectangle. This is the square that needs to be coloured blue in order to create the rotation symmetry. Finally, colour the square with the cross blue to create the rotation symmetry.

Answer:

Step-by-step explanation:

Answer:

82

Step-by-step explanation:

The function g(t) is defined as:

g(t) = 1/√(16-t^2)

The function is continuous for all values of t that satisfy the following conditions:

The denominator is non-zero:

The denominator of the function is √(16-t^2). Therefore, the function is undefined when 16-t^2 < 0, or when t is outside the interval [-4,4].

There are no vertical asymptotes:

The function does not have any vertical asymptotes, because the denominator is always positive.

Thus, the function g(t) is continuous on the interval [-4,4].

The width of the blanket to the nearest tenth of an inch is approximately 67.4 inches.

What is width in rectangle ?

In a rectangle, the width refers to the measurement of the shorter side of the rectangle, which is perpendicular to its length.

Let x be the width of the blanket in inches. Then the length of the blanket is x + 18 inches.

The area of the blanket is given by:

Area = Length x Width

5760 sq inches = (x + 18) inches * x inches

Expanding the right-hand side and solving for x, we get:

[tex]x^2 + 18x - 5760 = 0[/tex]

We can solve this quadratic equation using the quadratic formula:

[tex]x = (-b \pm \sqrt{(b^2 - 4ac)}) / 2a[/tex]

where a = 1, b = 18, and c = -5760. Plugging in these values, we get:

[tex]x = (-18 \pm \sqrt{(18^2 - 4(1)(-5760))}) / 2(1)[/tex]

[tex]x = (-18 \pm \sqrt{(18^2 + 23040)}) / 2[/tex]

x ≈ 67.42 or x ≈ -85.42

Since the width cannot be negative, the width of the blanket to the nearest tenth of an inch is approximately 67.4 inches.

To learn more about quadratic equation from the given link :

https://brainly.com/question/30098550

#SPJ1

Answer:

12×2, 3×8, 4×6

Step-by-step explanation:

To find the area of a parallelogram, the formula is A = bh.

1. Height: 6 ft

Base: 2 ft

6 × 2 = 12 ft

So it does not work.

2. Height: 12 ft

Base: 2 ft

12 × 2 = 24 ft

So it does work.

3. Height: 10 ft

Base: 14 ft

14 × 10 = 140 ft

So it does not work.

4. Height: 3 ft

Base: 4 ft

3 × 4 = 12 ft

So it does not work.

5. Height: 3 ft

Base: 8 ft

3 × 8 = 24 ft

So it does work.

6. Height: 4 ft

Base: 6 ft

4 × 6 = 24 ft

So it does work.

Answer:

Step-by-step explanation:

Let weight of fourth parcel be x

Mean = Sum of all values/total number of values.

8.5 = 7.7 + 7.6 + 8.2 + x/4

8.5 = 23.5 + x/4

8.5 × 4 = 23.5 + x

34 = 23.5 + x

34 - 23.5 = x

10.5 = x

Therefore, weight of the fourth parcel will be 10.5 kg

In scientific notation the distance of the Barnard’s star from Earth, is given as 3.5 × 10^13

Scientific notation is a way of writing very large or very small numbers in a more compact form using powers of 10. In scientific notation, a number is expressed as a product of a coefficient and 10 raised to a power. The coefficient must be greater than or equal to 1 but less than 10. The power of 10 indicates the number of places the decimal point is moved to obtain the original number.

For 35,000,000,000,000

you have to start counting the digits from the right. The decimal point would occur just before the first digit (that is the number 3)

Read more on Scientific notation here:https://brainly.com/question/5756316

#SPJ1

Step-by-step explanation:

If the polynomial 3x^3+ax^2-11x+3 is exactly divisible by (x – 1), then find the value of a. Hence, factorize the polynomial. can anyone help

Answer:

Step-by-step explanation:

2

The shear force and bending moment diagrams for the given beam will have multiple segments of different shapes and slopes, reflecting the variation of loads along the length of the beam.

To construct the shear and bending diagrams for the given beam, we need to analyze the beam for the different sections where the load is applied. We can break down the beam into five sections:

Leftmost section (0 ≤ x ≤ L/4)

Second section (L/4 < x ≤ L/2)

Third section (L/2 < x ≤ 5L/12)

Fourth section (5L/12 < x ≤ 7L/12)

Rightmost section (7L/12 < x ≤ L)

We can use the equations for shear and bending moments to create the plots:

For section 1: 0 ≤ x ≤ L/4

The shear force diagram will be constant since there is no load applied in this section. The bending moment diagram will be a sloping line, which will be zero at x = 0 and will increase linearly with x as we move toward the right end of the section.

For section 2: L/4 < x ≤ L/2

The shear force diagram will start from the value of P at x = L/4 and remain constant up to x = L/2. The bending moment diagram will be a parabolic curve, which will be zero at x = L/4 and L/2 and will reach a maximum value at the midpoint of the section.

For section 3: L/2 < x ≤ 5L/12

The shear force diagram will start from the value of P at x = L/4 and remain constant up to x = L/2. At x = 5L/12, a load of P/3 is added, causing the shear force to increase suddenly. The bending moment diagram will be a cubic curve, which will be zero at x = L/4 and L/2, and will have a local minimum at x = 5L/12.

For section 4: 5L/12 < x ≤ 7L/12

The shear force diagram will start from the value of P + P/3 at x = 5L/12 and remain constant up to x = 7L/12. The bending moment diagram will be a cubic curve, which will be zero at x = L/4 and L/2, and will have a local maximum at x = 7L/12.

For section 5: 7L/12 < x ≤ L

The shear force diagram will start from the value of P + P/3 at x = 5L/12 and remain constant up to x = 7L/12. At x = L/3, a load of P/3 is added, causing the shear force to decrease suddenly. The bending moment diagram will be a parabolic curve, which will be zero at x = L/4 and L/2 and will reach a minimum value at the midpoint of the section.

Find out more about the shear force

brainly.com/question/29664085

#SPJ4

The answer is 41 minutes.

explaination:

540 secs = 9 minutes

2/3 of 60 mins= 40 mins

(to find a fraction of a number you divide it by the denominator and times it after by the numerator)

9+40= 49

homework: 90 mins

reading and making lunch: 49 minutes

we want the difference so:

90-49= 41

Roberto spent 41 more minutes doing his homework than reading and making lunch.

So the radius of the sphere is approximately 2.88 feet (rounded to two decimal places).

Volume is the amount of space occupied by a three-dimensional object as measured in cubic units. It is the measure of the amount of material or substance that a container, object, or shape can hold.

Here,

To express r as a function of V, we can rearrange the equation V = 4/3πr³ to solve for r:

V = 4/3πr³

V / (4/3π) = r³

r = ³√(V / (4/3π))

r = ³√(3V / 4π)

To find the radius of a sphere with volume 100 cubic feet, we can substitute V = 100 into the equation:

r = ³√(3V / 4π)

= ³√(3(100) / (4π))

≈ 2.88 units

To know more about volume,

https://brainly.com/question/12237641

#SPJ1

Therefore, the coefficient of variation for the given data is approximately 24.71%.

A box plot, also known as a box-and-whisker plot, is a graphical representation of a data set that shows the distribution of the data using quartiles. It is a standardized way of displaying the distribution of data based on the five-number summary: minimum, first quartile, median, third quartile, and maximum. The box represents the middle 50% of the data, with the median marked by a line inside the box. The whiskers extend from the box to the minimum and maximum values, or to a certain range if there are outliers. Box plots are useful for comparing the distributions of different data sets and identifying potential outliers.

Here,

1. Stem-and-Leaf Plot:

A stem-and-leaf plot is a way to display data that separates the tens digit of each number from the ones digit. Here is the stem-and-leaf plot for the given data:

3 | 9 9

4 | 2 2 6 6

5 | 1 4 4 6

6 | 1 4 5 5 5 5 5 5

7 | 0 2 3 4

8 | 1 2 2 3 5

9 | 3 4

In this plot, the stem represents the tens digit and the leaves represent the ones digit.

2. Coefficient of Variation:

The coefficient of variation is a measure of the relative variability of a data set. It is calculated as the ratio of the standard deviation to the mean, expressed as a percentage. Here is how to calculate the coefficient of variation for the given data:

Calculate the mean of the data:

 Mean = (83+64+51+46+82+91+73+82+65+61+74+64+75+81+94+65+42+81+56+61+72+65+54+39+70+93+42+46+54+72)/20 = 68.25

Calculate the standard deviation of the data:

 Standard deviation = sqrt((1/20) * ((83-68.25)^2 + (64-68.25)^2 + ... + (72-68.25)^2))

Standard deviation ≈ 16.88

Calculate the coefficient of variation:

Coefficient of variation = (Standard deviation / Mean) * 100

Coefficient of variation ≈ 24.71%

3. Box Plot:

A box plot is a way to visualize the distribution of data. It displays the minimum value, first quartile (Q1), median, third quartile (Q3), and maximum value of the data. Here is the box plot for the given data:

  |              +----------+

94 |                        |

  |              +----------+

93 |              |

  |        +-----+-----+

82 |        |           |

  |        |           |

81 |        |           |

  |  +-----+           |

80 |  |                 |

  |  |                 |

79 |  |                 |

  |  |                 |

78 |  |                 |

  |  |                 |

77 |  |                 |

  |  |                 |

76 |  |                 |

  |  |                 |

75 |  |                 |

  |  |                 |

74 |  |                 |

  |  |                 |

73 |  |                 |

  |  |                 |

72 |  +-----------------+

  |                    

  +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

     1  2  3  4  5  6  7  8  9  10 11 12 13 14 15 16 17 18 19 20

In this plot, the horizontal line inside the box represents the median, the bottom and top edges of the box represent the first and third quartiles (Q1 and Q3), respectively, and the vertical lines extending from the box represent the minimum and maximum values, excluding outliers.

4. To find the 85th percentile, we need to arrange the data in order from smallest to largest:

39, 42, 42, 46, 46, 51, 54, 56, 61, 61, 64, 64, 65, 65, 65, 70, 72, 72, 73, 74, 75, 81, 81, 82, 82, 83, 91, 93, 94

There are a total of 20 scores, so the 85th percentile would be the score at the 0.85(20) = 17th position:

85th percentile = 72

To find the 2nd decile, we first need to calculate the number of scores in each decile. Since there are 20 scores, each decile would have 2 scores. The 2nd decile would be the score at the 0.2(20) = 4th position:

2nd decile = 46

To know more about box plot,

https://brainly.com/question/1523909

#SPJ1

Complete question:

Please, I need help with this, it's about statistics. Thank you very much. The grades of 20 students who took an admission exam to a certain faculty, using a scale of 0 to 100, were: 83 64 51 46 82 91 73 82 65 61 74 64 75 81 94 65 42 81 56 61 72 65 54 39 70 93 42 46 54 72

• Make: stem-and-leaf plot

• Calculate: coefficient of variation

• Create a box plot

• 85th percentile, 2nd decile.