Answer:
They don't have to deal with the Earth's atmosphere
Explanation:
Space telescopes have the advantage of being above the blurring effects of the Earth's atmosphere
in the common lab measurements experiment, how is the crucible heated before adding the hydrated sulfate?
In the common lab measurements experiment, the crucible is typically heated using a Bunsen burner or a hot plate before adding the hydrated sulfate.
What is a Bunsen burner?
A Bunsen burner is a common laboratory tool used for heating, sterilization, and combustion. It consists of a metal base with a vertical metal tube that has an adjustable air intake and gas valve. The gas valve controls the amount of gas that is allowed to enter the burner, while the air intake controls the amount of oxygen that is allowed to mix with the gas.
The goal is to heat the crucible to a high temperature to remove any moisture or impurities that may be present on the surface of the crucible. This ensures that the mass of the crucible is accurately measured before and after the addition of the hydrated sulfate.
To heat the crucible using a Bunsen burner, the burner is placed under a tripod or ring stand, and the crucible is placed on a clay triangle or wire gauze over the flame. The burner is adjusted to produce a hot, blue flame, and the crucible is heated for several minutes until it glows red.
To heat the crucible using a hot plate, the hot plate is turned on and set to a high temperature, and the crucible is placed on the plate. The hot plate heats the crucible evenly, and the temperature can be adjusted as needed to achieve the desired level of heat.
After the crucible has been heated, it is allowed to cool to room temperature before the hydrated sulfate is added.
Hence, a Bunsen burner is used to heat the crucible.
To learn more about a Bunsen burner:
https://brainly.com/question/10281181
#SPJ4
How many ions would you expect MgBr2 to break down into in water?2314
When MgBr2 is dissolved in water, it would break down into three ions.MgBr2 is an ionic compound consisting of one magnesium cation (Mg2+) and two bromide anions (Br-).
When MgBr2 is dissolved in water, the water molecules surround and separate the ions from each other. This process is known as hydration. The magnesium cation has a charge of +2, while the bromide anions have a charge of -1 each. Therefore, to achieve overall electrical neutrality, two bromide ions are required for every magnesium ion.
In water, the magnesium cation and bromide anions dissociate from the solid compound and become hydrated, surrounded by water molecules. Since there are two bromide anions per magnesium cation in MgBr2, the compound would dissociate into three ions: one magnesium ion (Mg2+) and two bromide ions (2Br-). Therefore, when MgBr2 is dissolved in water, it would break down into three ions.
Find more about MgBr2
brainly.com/question/27249833
#SPJ4
Calculate the mass of sodium acetate trihydrate required to make 100. Ml of a 0. 100 m solution. As part of your preparation for this experiment, record your answer to this question in your notes so that you have it ready to reference during the lab session. If you do not get this question correct, please make sure to revisit the calculation and check your corrected value with your ta prior to the lab session.
The mass of sodium acetate trihydrate required to make 100 mL of a 0.100 M solution is 0.100 grams. To make a 0.100 M solution, 0.100 moles of sodium acetate trihydrate is required for every liter of solution.
As a result, we can calculate the required mass of sodium acetate trihydrate by multiplying the number of moles by the molar mass of sodium acetate trihydrate, which is 82.03 g/mol. Sodium acetate trihydrate (CH3COONa•3H2O) is a white crystalline solid that is commonly used in various applications, including in food production as a flavor enhancer and in the laboratory as a buffer solution.
To make a 0.100 M solution, 0.100 moles of sodium acetate trihydrate is required for every liter of solution. To find the number of moles, we can multiply the concentration by the volume: 0.100 M x 0.100 L = 0.0100 moles. The molar mass of sodium acetate trihydrate is 82.03 g/mol, so we can multiply the number of moles by the molar mass to find the required mass: 0.0100 moles x 82.03 g/mol = 0.100 grams.
Learn more about sodium acetate trihydrate:
https://brainly.com/question/8445600
#SPJ4
Is sucrose a reducing or non-reducing sugar?
Sucrose is a non-reducing sugar.
A reducing sugar is a sugar that has a free aldehyde or ketone functional group, which can reduce certain chemicals such as Benedict's solution and Fehling's solution. On the other hand, non-reducing sugars do not have free aldehyde or ketone groups and, therefore, cannot reduce these chemicals.
Sucrose is a disaccharide made up of glucose and fructose, which are both reducing sugars on their own. However, when they are joined together by a glycosidic linkage, the aldehyde group of glucose and the ketone group of fructose are bonded together, forming a non-reducing disaccharide. Therefore, sucrose cannot reduce Benedict's or Fehling's solution and is considered a non-reducing sugar.
To know more about the sucrose, here
brainly.com/question/29186350
#SPJ4
What is br molar mass ?
The molar mass of bromine (Br) is 79.904 g/mol.
The molar mass of an element is the mass in grams of one mole of that element. It is equal to the atomic weight of the element in atomic mass units (amu) and is expressed in grams per mole (g/mol).
Molar mass can be found on the periodic table of elements, where the atomic weight of each element is listed.
To calculate the molar mass of a compound, you simply add up the molar masses of each element in the compound. For example, the molar mass of HBr (hydrogen bromide) would be the molar mass of hydrogen (1.008 g/mol) plus the molar mass of bromine (79.904 g/mol), which equals 80.912 g/mol.
The molar mass of an element or compound is an important concept in chemistry that allows us to relate the mass of a substance to the number of moles of that substance.
To know more about molar mass here:
https://brainly.com/question/30216315#
#SPJ11
is sugar ionic or covalent
The sugar is the covalent compound. The sugar is composed of the carbon, the oxygen, and the hydrogen .
The Sugar, are composed of the carbon, the oxygen, and the hydrogen and has the covalent bonds. The covalent bond is formed when the bond is formed by the mutual sharing of the electrons in between the atoms or the molecules.
The compound formed by the covalent bond is called as the covalent compounds. Therefore, the sugar is the covalent compound as all the covalent bonds in the sugar molecules arise by the result of the electron sharing in between the atoms.
To learn more about covalent here
https://brainly.com/question/30420584
#SPJ4
Which type of circulation does the right side of the heart provide?
a. pulmonary
b. cerebral
c. extremity
d. systemic
The right side of the Heart provides Pulmonary Circulation.
What is a Heart?
The main organ of your circulatory system, a web of blood veins that circulates blood throughout your body, is your heart. Your heart rate and blood pressure are also controlled by other bodily systems.
The heart is a type of pumping machine that is used to pump blood through the vessels of your body. This includes carrying out oxygen and nutrients in the body and carrying out carbon dioxide from the body.
Therefore the heart is a very important part of our body.
To learn more about Heart from the given link
https://brainly.com/question/16566688
#SPJ4
One mole of the ionic compound, NaCl, will dissolve into _ _ _ _ _ _ _ moles of particles in aqueous solution.
One mole of the ionic compound NaCl will dissolve into two moles of particles in aqueous solution.
When NaCl dissolves in water, it dissociates into its constituent ions, Na+ and Cl⁻. Each formula unit of NaCl dissociates into one Na⁺ ion and one Cl⁻ ion, so one mole of NaCl will produce one mole of Na⁺ ions and one mole of Cl⁻ ions, for a total of two moles of particles.
It's important to note that not all ionic compounds will dissociate into two ions like NaCl does. Some ionic compounds, like CaCO₃ (calcium carbonate), will only dissociate partially into ions in solution, while others may dissociate into more than two ions. However, for NaCl specifically, one mole will dissociate into two moles of particles in solution.
To know more about the NaCl, here
brainly.com/question/18248731
#SPJ4
What is the energy of ATP?
One ATP molecule hydrolyzes to provide 7.3 kcal/mol of energy.
ATP (adenosine triphosphate) is a molecule that stores and transports chemical energy within cells. The energy stored in ATP is used to power many cellular processes, including metabolism, protein synthesis, and cell division.
The energy in ATP is stored in the bonds between its three phosphate groups. When one of these bonds is broken, energy is released and ATP is converted to ADP (adenosine diphosphate). This energy can then be used to power up cellular processes.
The energy of ATP is stored in the bonds between its phosphate groups and is used to power many important cellular processes.
To know more about ATP (adenosine triphosphate) here:
https://brainly.com/question/897553#
#SPJ11
Why is proline often found at places in proteins that are not alpha-helical?
(Select all that apply)
A. Proline, unlike other amino acids, has a fixed angle of rotation around its C(alpha)-C(O) bond.
B. Proline is only found in beta-sheets.
C. Proline has a side chain that is too bulky for alpha-helices.
D. Proline, unlike other amino acids, has a fixed angle of rotation around its C(alpha)-N bond.
E. Proline fits well into beta-turns.
A. Proline, unlike other amino acids, has a fixed angle of rotation around its C(alpha)-C(O) bond.
C. Proline has a side chain that is too bulky for alpha-helices.
E. Proline fits well into beta-turns.
These are the correct options.
What is Amino Acid?
Amino acids are organic compounds that are the building blocks of proteins. They contain both an amino group (-NH2) and a carboxyl group (-COOH), as well as a side chain that is specific to each amino acid. There are 20 different amino acids that are commonly found in proteins, each with a unique side chain that gives it its unique properties. Amino acids are linked together by peptide bonds to form polypeptide chains, which then fold and interact to form functional proteins. In addition to their role in protein synthesis, amino acids also have many other important functions in the body, including serving as precursors for the synthesis of neurotransmitters and other molecules.
Learn more about Amino Acid from given link
https://brainly.com/question/28362783
#SPJ4
What is an ICE table?
An ICE (Initial, Change, Equilibrium) table is simple matrix formalism that used to simplify the calculations in reversible equilibrium reactions (e.g., weak acids and weak bases or complex ion formation).
In most cases, ICE tables are used to calculate the K, or equilibrium constant expression, of a reaction (in some cases, K may be given, and one or more of the concentrations in the table will be the unknown to be solved for). ICE tables are made up of the concentrations of molecules in solution at various stages of a reaction. The variables and constants required to calculate the unknown are automatically set up and organized in ICE tables.
The first column of the table's titles are abbreviated as ICE.
Initial focus is denoted by the letter I. The initial product and reactant concentrations are listed in this row.
know more about ICE table click here;
https://brainly.com/question/30395953?referrer=searchResults
#SPJ4
Part A Properly using a centrifuge requires that several important steps be performed correctly. Choose the three main steps in properly using this piece of equipment. a. Using a test tube with approximately the same volume as your sample tube to balance the centrifuge b.Placing the test tubes side by side for best separation. c. Stop the roation of the centruluge by using a paper towel or stopper until stopped d. Using the exact same type of test tube and solution in 3-4 test tubes. e. Ensuring the centrifuge is completely stopped before removing samples f. Placing the test tubes across from each other to balance out the centrifuge.
Placing the test tubes across from each other to balance out the centrifuge.
Using a test tube with approximately the same volume as your sample tube to balance the centrifuge
Ensuring the centrifuge is completely stopped before removing samples
How do you use a centrifuge?Ensure that the centrifuge is clean, balanced, and in good working condition. Select the appropriate rotor and tube size for the sample, and check the maximum speed and time limit of the centrifuge.
Close the centrifuge lid securely, and ensure that it is locked in place. Failure to properly secure the lid can result in the rotor becoming unbalanced and dangerous.
Learn more about centrifuge:https://brainly.com/question/17065689
#SPJ1
Of all the species that enzymes bind, they are thought to bind most tightly to _____. a) substrates b) products c) transition states d) intermediates
It is believed that Transition states are the species that enzymes bind to most strongly out of all other species.
What is meant by Enzyme?The ability of an enzyme's active site to connect to its substrate or substrates specifically with the help of certain amino acids can speed up chemical reactions.An enzyme will attach to (bind) one or more reactant molecules in order to catalyze a process. These substances are the substrates for the enzyme.One substrate may split into several products in various reactions. The byproducts then depart from the enzyme's active site.The biochemical reactions in living things are sped up by enzymes, which are biological catalysts. Enzymes have little impact on the process' equilibrium.The substrate is transformed into the product by the enzymes. The enzymes create the enzymes substrate complex when they bind to the active site of the substrate.To learn more about Enzyme, refer to:
https://brainly.com/question/2536131
#SPJ4
The Bohr effect describes the tendency for hemoglobin to more readily unload oxygen under which conditions?increased pH and decreased PCO2decreased pH and decreased temperatureincreased pH and PCO2decreased pH and increased temperature
The Bohr effect describes the tendency for a hemoglobin to more readily unload oxygen under decreased pH and increased temperature. Option D is correct.
The Bohr effect describes the tendency for hemoglobin to more readily unload oxygen under decreased pH conditions. This means that when the pH of the blood decreases, hemoglobin is more likely to release its bound oxygen molecules to the tissues that need it. This is a crucial mechanism for the efficient delivery of oxygen to active tissues during periods of increased metabolic demand.
In addition to decreased pH, other factors that can enhance the Bohr effect and increase oxygen release include increased levels of carbon dioxide (PCO₂) and increased temperature. However, increased pH would actually decrease the Bohr effect and decrease the release of oxygen from hemoglobin.
Hence, D. decreased pH and increased temperature is the correct option.
To know more about Bohr effect here
https://brainly.com/question/7017026
#SPJ4
--The given question is incomplete, the complete question is
"The Bohr effect describes the tendency for hemoglobin to more readily unload oxygen under which conditions? A) increased pH and decreased PCO₂ B) decreased pH and decreased temperature C) increased pH and PCO₂ D) decreased pH and increased temperature."--
How many lone pairs does CH3OH have?
CH3OH has two lone pairs, both of which are on the oxygen atom.
The core atom in CH3OH (methanol) is carbon (C), which possesses four valence electrons. Methanol is made up of three hydrogen atoms, one carbon atom, and one oxygen atom. Since oxygen has six valence electrons and likes to create two covalent bonds with other atoms, oxygen forms two single bonds with the carbon atom in methanol.
Each of methanol's three hydrogen atoms creates a single connection with the carbon atom. This leaves the oxygen atom with two pairs of unshared electrons, or lone pairs, one on each side. These two lone pairs on the oxygen atom form no chemical connections with the other atoms in the molecule.
For more such questions on lone pairs, click on:
https://brainly.com/question/3915115
#SPJ4
Why is a direct comparison of station pressures difficult? 1. Station pressures change abruptly over small horizontal distances even when there is no appreciable change in elevation. 2. Weather stations are often at different altitudes 3. Aneroid barometers are extremely inaccurate 4. All of the above
The pressure that can be measured at a particular height and is considered to be a location's actual barometric pressure is called station pressure.
What are the benefits of pressure altitude?Aircraft performance and flight levels are both based on pressure altitude, which is crucial for aircraft operating at or above 18,000 feet. Pressure altitude is adjusted for non-standard temperature to produce density altitude.
The pressure that can be measured at a particular height and is considered to be a location's actual barometric pressure is called station pressure. In radio and television broadcasts, the pressure reading that is most frequently heard is the altimeter setting. The barometric pressure at a station is not accurate.
Even when there is no discernible change in elevation, station pressures quickly shift across short horizontal distances.
The station pressure, which is the actual barometric pressure of a location, is the pressure that is measured at a particular elevation. The pressure indication that is most frequently heard in radio and television broadcasts is the altimeter setting. It is not the station's actual barometric pressure.
Therefore, the correct answer is option 4. All of the above.
To learn more about pressures refer to:-
brainly.com/question/30482677
#SPJ4
particles of electromagnetic radiation are called ______, and each has a discrete amount of energy called a ______. since electromagnetic radiation also has wave properties, each particle is also characterized by a specific ______ and frequency.
Particles of electromagnetic radiation are called photons, and each has a discrete amount of energy called a quantum or a photon energy. Since electromagnetic radiation also has wave properties, each photon is also characterized by a specific wavelength and frequency.
According to the equation E = hf, where E is the energy of a photon, h is Planck's constant, and f is the photon's frequency, the energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength.
A type of energy that moves through space at the speed of light is electromagnetic radiation. It is made up of oscillating magnetic and electric fields that are parallel to the wave's propagation direction and to each other.
Magnetic field radiation can have
Learn more about electromagnetic radiation here:
https://brainly.com/question/10759891
#SPJ4
Which temperature change would cause a sample of an ideal gas to double in volume while the pressure is held constant?
A temperature change from 200 K to 400 K, which is a doubling of the temperature would cause a sample of an ideal gas to double in volume while the pressure is held constant. Option (2)
According to Charles's law, at constant pressure, the volume of a gas is directly proportional to its temperature (in kelvins). Mathematically, this relationship can be expressed as V₁/T₁ = V₂/T₂, where V is volume and T is temperature.
If the volume of an ideal gas is to double while the pressure is held constant, the final volume (V₂) must be twice the initial volume (V₁). Therefore, using the above equation, T₂ must be twice T₂.
Options (1), (3), and (4) do not describe a doubling of temperature, so they would not cause a doubling of volume at constant pressure.
The complete question is;
Which temperature change would cause a sample of an ideal gas to double in volume while the pressure is held constant?
(1) from 400 K to 200 K
(2) from 200 K to 400 K
(3) from 400 ⁰C to 200 ⁰C
(4) from 200 ⁰C to 400 ⁰C
Want to know more about an ideal gas visit the link which is given below;
https://brainly.com/question/14934878
#SPJ4
one mole of the ionic compound, nacl, will dissolve into _ _ _ _ _ _ _ moles of particles in aqueous solution.
one mole of the ionic compound, nacl, will dissolve into 6 moles of particles in aqueous solution.
What is ionic compound?
An ionic compound is a type of chemical compound that consists of ions held together by ionic bonds. Ionic compounds are formed when positively charged ions (cations) bond with negatively charged ions (anions). The cations are formed from metals, while the anions are formed from nonmetals. Ionic compounds are usually soluble in water and are typically solid at room temperature. Examples of ionic compounds include sodium chloride (NaCl), magnesium sulfate (MgSO4), and aluminum oxide (Al2O3). Ionic compounds are found in everyday items such as table salt, baking soda, and bleach.
Therefore, one mole of the ionic compound, nacl, will dissolve into 6 moles of particles in aqueous solution.
To learn more about ionic compound
Here: https://brainly.com/question/29473901
#SPJ4
NMR signals may consist of a single peak, or they may be __ into several peaks. The number of peaks for a particular signal is called its __.
NMR signals can either be composed of a single peak or many peaks. A signal's multiplicity is defined as the total number of peaks for that signal.
What is meant by NMR signals?Nuclear magnetic resonance spectroscopy, also referred to as magnetic resonance spectroscopy or NMR spectroscopy, is a spectroscopic method for observing the local magnetic fields surrounding atomic nuclei.
The number of distinct types of protons in a molecule is represented by the number of NMR signals. This is the illustration we used to explain NMR spectroscopy: There are five signals in the spectrum, each of which points to a distinct sort of proton.
By counting the amount of distinct hydrogens on one side of the symmetry plane, it is possible to estimate how many signals these molecules emit in a 1H NMR spectrum.
To learn more about NMR signals refer to:
https://brainly.com/question/30583972
#SPJ4
describe how you could use the liquid's physical and chemical properties to determine what liquid it might be
We would look at the liquid's solubility as well as boiling point to establish the kind of liquid based on its physical and chemical qualities.
What is liquid?One of the four main states of matter is liquid, the others who were solid, gas, and plasma. A liquid is a form of fluid. In contrast to a solid, those molecules found in a liquid possess significantly more flexibility to move.
The forces that hold molecules together within a solid are really only transient in a liquid, permitting it to flow while still being a solid. We would look at the liquid's solubility as well as boiling point to establish the kind of liquid based on its physical and chemical qualities.
Therefore, we would look at the liquid's solubility as well as boiling point to establish the kind of liquid based on its physical and chemical qualities.
To know more about liquid, here:
https://brainly.com/question/20922015
#SPJ9
Your question is incomplete but most probably your full question was,
Describe how you could use the liquid's physical and chemical properties to determine what liquid it might be? solubility, melting point, boiling point
What is the strongest NSAID?
Non-selective COX inhibitors, such as indomethacin, ketorolac, and diclofenac, are often regarded as the most powerful NSAIDs and are frequently used to treat acute pain and inflammation.
Nonsteroidal anti-inflammatory medicines (NSAIDs) are a group of medications used to treat pain, fever, and inflammation. They function by inhibiting the activity of an enzyme known as cyclooxygenase (COX), which is responsible for the production of prostaglandins, a kind of hormone involved in pain and inflammation.
There are several forms of NSAIDs, each with its own potency, dose, and duration of effect. Non-selective COX inhibitors, such as indomethacin, ketorolac, and diclofenac, are often regarded as the most powerful NSAIDs and are frequently used to treat acute pain and inflammation. These medications act by inhibiting both COX-1 and COX-2 enzymes, which can result in more pain relief but also increases the risk of adverse effects.
Some NSAIDs, such as ibuprofen and naproxen, are useful in reducing pain and inflammation but are thought to be less powerful than non-selective COX inhibitors. These medications act by primarily inhibiting COX-2, which reduces the likelihood of certain adverse effects such as stomach ulcers and bleeding.
For more such questions on NSAIDs, click on:
https://brainly.com/question/17173688
#SPJ4
Calculate the bond order for one carbon-carbon bond in the benzene molecule, taking σ and π bonding into consideration?
the bond order for one carbon-carbon bond in the benzene molecule, taking σ and π bonding into consideration will be 1.5.
In the benzene molecule, there are 6 carbon atoms arranged in a hexagonal ring, with alternating single and double bonds. Each carbon atom is covalently bonded to two other carbon atoms, with one single bond and one double bond.
To calculate the bond order for one carbon-carbon bond in benzene, we need to take into account both the σ (sigma) and π (pi) bonding. The σ bond is formed by the overlap of two atomic orbitals along the internuclear axis, while the π bond is formed by the overlap of two atomic orbitals perpendicular to the internuclear axis.
In the case of benzene, each carbon-carbon bond has one σ bond and one π bond. The total bond order for each bond can be calculated as the sum of the bond orders for the σ and π bonds. The bond order for a σ bond is 1, while the bond order for a π bond is 0.5.
Therefore, the bond order for one carbon-carbon bond in the benzene molecule is:
Bond order = (σ bond order) + (π bond order) = 1 + 0.5 = 1.5
So the bond order for one carbon-carbon bond in the benzene molecule is 1.5.
Learn more about carbon here:
https://brainly.com/question/3049557
#SPJ4
How many grams of iron are produced when 220 g of iron(III) oxide (Fe2O3) are reacted? Show work
Fe2O3+3 H₂--> 2Fe + 3H₂O
1 mol Fe₂03-159.6 g Fe2O3
1 mol Fe=55.8 g Fe
the amount of the iron that is produced was found to be 195.8 g of iron will be produced.
write the balanced equation of the iron oxide ?
According to the balanced chemical equation:
Fe2O3 + 3H2 → 2Fe + 3H2O
We can see that 1 mole of Fe2O3 reacts to produce 2 moles of Fe. We can use this ratio to convert the given mass of Fe2O3 to the mass of Fe produced.
1 mol Fe2O3 = 159.6 g Fe2O3
220 g Fe2O3 x (1 mol Fe2O3/159.6 g Fe2O3) x (2 mol Fe/1 mol Fe2O3) x (55.8 g Fe/1 mol Fe) = 195.8 g Fe
To solve this problem, we first need to use stoichiometry to determine how much iron (Fe) will be produced from the given amount of iron(III) oxide (Fe2O3).
Therefore, 195.8 g of iron will be produced.
To learn more about iron follow the given link: https://brainly.com/question/14964747
#SPJ1
What is the chloride lewis dot structure?
The Lewis dot structure of chloride ion (Cl-) is represented by a single dot on the outermost shell of Cl.
The chloride particle is an adversely charged particle made out of one chlorine molecule. The Lewis spot design of chloride particle is addressed by the image Cl−, which has a solitary speck on its peripheral shell. The spot addresses a valence electron that isn't associated with holding with different iotas. Chlorine has seven valence electrons, yet it needs another electron to finish its octet, so it acquires one electron from one more particle to shape the chloride particle. In the Lewis speck structure, the chloride particle is encircled by eight dabs, addressing the full octet of electrons. The chloride particle is in many cases found in ionic mixtures like sodium chloride (NaCl).
To learn more about lewis dot structure, refer:
https://brainly.com/question/20300458
#SPJ4
Which of these ions is most likely to be leached from the soil?
a. magnesium ions,
b. chlorine ions,
c. calcium ions,
d. iron ions, or
e. potassium ions
Options e, Potassium ions are most likely to be leached from the soil.
The ion that is most susceptible to being solubilized from soil depends on the chemistry of the soil, the amount of moisture in the soil, and whether or not any plants may absorb particular ions.
Positively charged ions like potassium, magnesium, as well as calcium may often be leached out of the soil when it's moist and migrates into the groundwater along with the water.
However, due to their pH levels, mineral makeup, and other characteristics, some soils are more prone to the leaching of particular ions.
Learn more about soil at
https://brainly.com/question/23813511
#SPJ4
The O-H stretch of a concentrated solution of an alcohol occurs at a lower frequency than the O-H stretch of a a dilute solution. True or False
The statement that the O-H stretch of a concentrated solution of alcohol occurs at a lower frequency than the O-H stretch of a dilute solution is False.
Does the O-H stretch of a concentrated solution of alcohol occur at a lower or higher frequency than the O-H stretch of a dilute alcohol solution?The O-H stretch of a concentrated solution of alcohol occurs at a higher frequency than the O-H stretch of a dilute solution.
This is because, in a concentrated solution, there are more intermolecular hydrogen bonding interactions between the alcohol molecules, which leads to a stronger bond and higher vibrational frequency. In a dilute solution, there are fewer intermolecular hydrogen bonding interactions, resulting in a weaker bond and lower vibrational frequency.
Learn more about O-H stretch of alcohol at: https://brainly.com/question/30425622
#SPJ1
The enthalpy of formation of gaseous carbon dioxide is −393.5 kJ/mol. What is the equation that represents the formation of gaseous carbon dioxide?
The equation representing the formation of gaseous carbon dioxide is: CO2 (g) = C (s) + O2 (g).
The enthalpy of formation of a substance is the amount of energy required to form one mole of that substance from its constituent elements in their standard states. In the case of gaseous carbon dioxide, the enthalpy of formation is −393.5 kJ/mol. The equation representing the formation of gaseous carbon dioxide is:
CO2 (g) = C (s) + O2 (g)where C represents elemental carbon in its solid form and O2 represents elemental oxygen in its gaseous form.
This equation shows that one mole of carbon dioxide is formed from one mole of solid carbon and one mole of gaseous oxygen. The negative sign in the enthalpy of formation value indicates that energy is released in the formation of gaseous carbon dioxide from its constituent elements.
Learn more about gaseous carbon dioxide:
https://brainly.com/question/11867819
#SPJ4
What is the clf5 lewis structure?
Explanation:
- Clf5 Lewis Structure.
What type of compound is NaNO3?
The chemical name for NaNO3 is Sodium Nitrate. It appears as a white crystalline solid. It is the nitrate of sodium.
The formula for Sodium nitrate is NaNO3. It appears as a white crystalline solid. It is noncombustible. It accelerates the burning of combustible materials. Sodium nitrate leads to explode under prolonged exposure to heat or fire. It is used in the solid propellants, explosives, fertilizers. It is classified as the inorganic nitrate salt of sodium. Sodium nitrate has a role of the fertilizer. It is called as an an inorganic sodium salt and an inorganic nitrate salt. This is the nitrate of sodium. It is used in the fertilizers, pyrotechnics as a food preservative. It is used as a solid rocket propellant and also in glass and pottery enamels.
To learn more about Sodium nitrate salt please visit:
https://brainly.com/question/24256699
#SPJ4