estimate the sample size required if you made no assumptions about the value of the proportion who could taste ptc. give your answer rounded up to the nearest whole number.

Answers

Answer 1

We need to round up to the nearest whole number, the estimated sample size required is 385.

To estimate the sample size required for a proportion without making any assumptions about the value of the proportion, we can use the formula for sample size calculation in a proportion estimation problem.

The formula is:
[tex]n = (Z^2 \times p \times  (1-p)) / E^2[/tex]
Where:
- n is the sample size
- Z is the Z-score, representing the level of confidence (e.g., 1.96 for a 95% confidence level)
- p is the estimated proportion (in this case, we'll use the most conservative value, 0.5)
- E is the margin of error (the maximum acceptable difference between the true proportion and the estimated proportion)
Since we're not given a specific margin of error or confidence level, I'll assume a margin of error of 0.05 (5%) and a 95% confidence level (Z-score of 1.96).

Plugging these values into the formula:
[tex]n = (1.96^2 \times 0.5 \times  (1-0.5)) / 0.05^2[/tex]
[tex]\int\limits^a_b {x} \, dx[/tex]
n = 0.9604 / 0.0025
n = 384.16.

For similar question on proportion.

https://brainly.com/question/29006912

#SPJ11

Answer 2

To estimate the sample size required without any assumptions about the value of the proportion who could taste ptc, we need to use a conservative estimate.

A common approach is to use a proportion of 0.5 (50%) since this is the proportion that maximizes the sample size for a given level of confidence. Using this approach and assuming a 95% confidence level, the sample size required would be approximately 385 participants.

This means that if we randomly selected 385 participants from the population, we can estimate the proportion who can taste ptc with a margin of error of plus or minus 5% at a 95% confidence level. It is important to note that this is only an estimate and the actual sample size required may vary based on the variability of the population proportion.
To estimate the sample size without making assumptions about the value of the proportion who can taste PTC, we will use the most conservative estimate for the proportion, which is 0.5. This value maximizes the required sample size and ensures that we have enough participants for the study.

So, the estimated sample size required is 385.

To learn more about sample size click here, brainly.com/question/30885988

#SPJ11


Related Questions

use a definite integral to find the area under the curve between the given x-values. f(x) = 3x2 4x − 1 from x = 1 to x = 2 square units

Answers

The area under the curve of f(x) = 3x^2 + 4x - 1 from x = 1 to x = 2 is 12 square units.

We are given the function[tex]f(x) = 3x^2 + 4x - 1[/tex] and asked to find the area under the curve between x = 1 and x = 2.

Identify the integral boundaries.
We are given the boundaries as x = 1 and x = 2.

Set up the definite integral.
To find the area under the curve, we need to set up the definite integral: ∫(from 1 to 2) [tex](3x^2 + 4x - 1)[/tex] dx.

Step 3: Find the antiderivative.
We need to find the antiderivative of the function inside the integral.

The antiderivative of 3x^2 + 4x - 1 is F(x) = x^3 + [tex]2x^2 - x + C,[/tex]  where C is the constant of integration.
Evaluate the definite integral.
Now, we evaluate the definite integral using the antiderivative and the given boundaries.

We do this by finding F(2) - F(1).
[tex]F(2) = (2^3) + 2(2^2) - (2) + C = 8 + 8 - 2 + C = 14 + C[/tex]
[tex]F(1) = (1^3) + 2(1^2) - (1) + C = 1 + 2 - 1 + C = 2 + C[/tex]
Now subtract: F(2) - F(1) = (14 + C) - (2 + C) = 12 square units.

For similar question on integral boundaries.

https://brainly.com/question/31398011

#SPJ11

The total area of the regions between the curves is 12 square units

Calculating the total area of the regions between the curves

From the question, we have the following parameters that can be used in our computation:

y = 3x² + 4x - 1

The interval is given as

x = 1 and x = 2

Using definite integral, the area of the regions between the curves is

Area = ∫y dx

So, we have

Area = ∫3x² + 4x - 1

Integrate

Area =  x³ + 2x² - x

Recall that x = 1 and x = 2

So, we have

Area = [2³ + 2 * 2² - 2] - [1³ + 2 * 1² - 1]

Evaluate

Area =  12

Hence, the total area of the regions between the curves is 12 square units

Read more about area at

brainly.com/question/15122151

#SPJ4

Guided Practice




Suppose you have $500 to deposit into an account. Your goal is to have $595 in that account at the end of the second year. The formula r= A P −1 gives the interest rate r that will allow principal P to grow into amount A in two years, if the interest is compounded annually. Use the formula to find the interest rate you would need to meet your goal.




A.


8. 4%




B.


19%




C.


9. 1%

Answers

Solution:The formula for the interest rate that will allow principal P to grow into amount A in two years, if the interest is compounded annually isr= A P-1We are given that we have $500 to deposit into an account and our goal is to have $595 in that account at the end of the second year.Hence, initial amount P = $500, A = $595 and t = 2 yearsPutting these values in the formula, we have:r= A P-1r= 595 500-1r= 1.19-1r= 0.19 or 19%Therefore, the interest rate required is 19%.Answer: B. 19%.

Learn more about Initial amount here,What is the initial value.

https://brainly.com/question/10155554

#SPJ11

Write a scheme function (tribonacci n). The tribonacci numbers Ti are defined as T0 = T1 = 0, T2 = 1, and TN = TN-1 + TN-2 + TN-3. (tribonacci n) should return Tn. tribonacci and any helper functions must be tail recursive.

Answers

It calls itself with b, c, and a+b+c as the new values for a, b, and c, respectively, and decrements n by one.

Here's a tail-recursive implementation of the tribonacci function in Scheme:

(define (tribonacci n)

 (define (tribonacci-helper a b c n)

   (if (= n 0)

       a

       (tribonacci-helper b c (+ a b c) (- n 1))))

 (tribonacci-helper 0 0 1 n))

The tribonacci-helper function is tail-recursive, meaning that the final calculation is the recursive call, and no additional work needs to be done after the recursive call returns. The tribonacci-helper function takes four arguments: a, b, c, and n. a, b, and c represent the previous three tribonacci numbers, and n is the current index being calculated. The function checks if n is zero. If so, it returns the current value of a, which will be the tribonacci number for index n. Otherwise, it calls itself with b, c, and a+b+c as the new values for a, b, and c, respectively, and decrements n by one.

Learn more about decrements here

https://brainly.com/question/28179077

#SPJ11

Claim: The mean systolic blood pressure of women aged 40-50 in the U.S. is equal to 126 mmHg.Test statistic: z = 1.72
A)0.9146
B)0.0472
C)0.9573
D)0.0854

Answers

The correct answer is (D) 0.0854. This means that if the significance level of the test is 0.05, we would fail to reject the null hypothesis, as the p-value (0.0854) is greater than the significance level (0.05).

We need to find the p-value associated with the given test statistic to determine the significance level of the claim. The p-value is the probability of obtaining a test statistic as extreme as or more extreme than the observed one under the null hypothesis.

Assuming that the null hypothesis is that the mean systolic blood pressure of women aged 40-50 in the U.S. is equal to 126 mmHg, and the alternative hypothesis is that it is not equal to 126 mmHg, we can use a two-tailed test.

Looking up the z-score table or using a calculator, we find that the area to the right of z = 1.72 is 0.0427. Since this is a two-tailed test, the area in both tails is 0.0427 x 2 = 0.0854.

Therefore, the correct answer is (D) 0.0854. This means that if the significance level of the test is 0.05, we would fail to reject the null hypothesis, as the p-value (0.0854) is greater than the significance level (0.05).

To know more about null hypothesis refer to

https://brainly.com/question/28920252

#SPJ11

Calculate [oh⁻] in a solution obtained by adding 1. 50 g solid koh to 1. 00 l of 10. 0 m nh₃. (kb of nh₃ is 1. 80 × 10⁻⁵)

Answers

The hydroxide ion concentration in the solution is 10.0 M.

The hydroxide ion concentration ([OH-]) in the solution, the reaction between [tex]KOH[/tex] and [tex]NH_3[/tex]

The balanced chemical equation for the reaction is:

[tex]KOH[/tex] + [tex]NH_3[/tex] -> [tex]K[/tex]+ [tex]NH_4OH[/tex]

From the equation, that 1 mole of [tex]KOH[/tex] reacts with 1 mole of [tex]NH_3[/tex] to form 1 mole of [tex]NH_4OH[/tex].

First, the number of moles of [tex]NH_3[/tex] in the solution:

Moles of [tex]NH_3[/tex] = Concentration of [tex]NH_3[/tex] × Volume of Solution

= 10.0 mol/L × 1.00 L

= 10.0 mol

Since 1 mole of [tex]KOH[/tex] reacts with 1 mole of [tex]NH_3[/tex], the number of moles of [tex]KOH[/tex] is also 10.0 mol.

calculate the number of moles of [tex]OH[/tex]- ions produced from [tex]KOH[/tex]:

Moles of [tex]OH[/tex]- = Moles of [tex]KOH[/tex] = 10.0 mol

The concentration of [tex]OH[/tex]- ions ([[tex]OH[/tex]-]) in the solution:

Volume of Solution = 1.00 L

[[tex]OH[/tex]-] = Moles of [tex]OH[/tex]- / Volume of Solution

= 10.0 mol / 1.00 L

= 10.0 M.

To know more about hydroxide here

https://brainly.com/question/31820869

#SPJ4

Solve the exponential equation by using the property that b = by means that = y whenever b>0 and b +1. piet2 - 16

Answers

The value of x must be equal to y to solve the given equation.

Assume the equation is bˣ = [tex]b^y[/tex] with b>0 and b ≠ 1.

To solve the exponential equation bˣ =  [tex]b^y[/tex], you can use the property that if bˣ =  [tex]b^y[/tex] , then x = y, as long as b > 0 and b ≠ 1.


1. Given the equation bˣ =  [tex]b^y[/tex] , with b > 0 and b ≠ 1.
2. Apply the property: if bˣ = [tex]b^y[/tex] , then x = y.
3. Thus, the solution is x = y.

In this case, the main answer is x = y. The property allows us to equate the exponents when the base is positive and not equal to 1, leading to a straightforward solution.

To know more about exponential equation click on below link:

https://brainly.com/question/29506679#

#SPJ11

Differentiation Use the geoemetric series to give a series for 1 1+x Then differentiate your series to give a formula for + ((1+x)-4)= ... (1 +x)2 1 dx

Answers

The geometric series to give a series for 1 1+x Then differentiate your series to give a formula for + ((1+x)-4)= ... (1 +x)2 1 dx is (1+x)^(-4) = -4/(1+x) + 4/(1+x)^3.

To obtain a series representation for 1/(1+x), we can use the geometric series formula:

1/(1+x) = 1 - x + x^2 - x^3 + ...

This series converges when |x| < 1, so we can use it to find a series for 1/(1+x)^2 by differentiating the terms of the series:

d/dx (1/(1+x)) = d/dx (1 - x + x^2 - x^3 + ...) = -1 + 2x - 3x^2 + ...

Multiplying both sides by 1/(1+x)^2, we get:

d/dx (1/(1+x)^2) = -1/(1+x)^2 + 2/(1+x)^3 - 3/(1+x)^4 + ...

To obtain a formula for (1+x)^(-4), we can use the power rule for differentiation:

d/dx (1+x)^(-4) = -4(1+x)^(-5)

Multiplying both sides by (1+x)^4, we get:

d/dx [(1+x)^(-4) * (1+x)^4] = d/dx (1+x)^0 = 0

Using the product rule and the chain rule, we can expand the left-hand side of the equation:

-4(1+x)^(-5) * (1+x)^4 + (1+x)^(-4) * 4(1+x)^3 = 0

Simplifying the expression, we get:

-4/(1+x) + 4/(1+x)^3 = (1+x)^(-4)

Therefore, (1+x)^(-4) = -4/(1+x) + 4/(1+x)^3.

Learn more about geometric series here

https://brainly.com/question/31123095

#SPJ11

The Oxnard Retailers Anti-Theft Alliance (ORATA) published a study that claimed the causes of disappearance of inventory in retail stores were 30 percent shoplifting, 50 percent employee theft, and 20 percent faulty paperwork. The manager of the Melodic Kortholt Outlet performed an audit of the disappearance of 80 items and found the frequencies shown below. She would like to know if her store’s experience follows the same pattern as other retailers. Reason Shoplifting Employee Theft Poor Paperwork Frequency 32 38 10 Using α = .05, the critical value you would use in determining whether the Melodic Kortholt Outlet’s pattern differs from the published study is Multiple Choice a) 7.815. b) 5.991. c) 1.960. d) 1.645

Answers

To determine if the Melodic Kortholt Outlet's pattern of inventory disappearance differs from the published study by ORATA, we need to perform a chi-square goodness-of-fit test. The null hypothesis is that the observed frequencies in the Melodic Kortholt Outlet follow the same pattern as the expected frequencies based on the ORATA study. The alternative hypothesis is that the observed frequencies differ from the expected frequencies.

We can calculate the expected frequencies by multiplying the total number of items (80) by the percentages given in the ORATA study: shoplifting (30%), employee theft (50%), and faulty paperwork (20%). This gives us expected frequencies of 24, 40, and 16, respectively.

To calculate the chi-square test statistic, we use the formula:

χ² = ∑(observed frequency - expected frequency)² / expected frequency

Plugging in the observed and expected frequencies, we get:

χ² = (32-24)²/24 + (38-40)²/40 + (10-16)²/16
χ² = 2.67

Using a chi-square distribution table with 2 degrees of freedom (3 categories - 1), and a significance level of α = .05, the critical value is 5.991.

Since our calculated chi-square value (2.67) is less than the critical value (5.991), we fail to reject the null hypothesis and conclude that the Melodic Kortholt Outlet's pattern of inventory disappearance does not significantly differ from the ORATA study's pattern. Therefore, the manager can conclude that her store's experience follows the same pattern as other retailers.

The correct answer to the question is b) 5.991

Learn more about chi-square test: https://brainly.com/question/4543358

#SPJ11

For exercises, 1-3 a) Parameterize the Curve c b) Find Ir (4) Evaluate the integral (in the plane) 4 Sxxy tz ds Z C is the circle r(t) =

Answers

Parameterization of the curve C: r(t) = (4cos(t), 4sin(t)), where t is the parameter.

Evaluating the integral ∫S(x^2 + y^2 + tz) ds over the curve C, which is a circle with radius 4.

To find the integral, we need to first express ds in terms of the parameter t. The arc length element ds is given by ds = |r'(t)| dt, where r'(t) is the derivative of r(t) with respect to t.

Taking the derivative, we have r'(t) = (-4sin(t), 4cos(t)), and |r'(t)| = √((-4sin(t))^2 + (4cos(t))^2) = 4.

Substituting this back into the integral, we have ∫S(x^2 + y^2 + tz) ds = ∫S(x^2 + y^2 + tz) |r'(t)| dt = ∫C((16cos^2(t) + 16sin^2(t) + 4tz) * 4) dt.

Simplifying further, we have ∫C(64 + 4tz) dt = ∫C(64dt + 4t*dt) = 64∫C dt + 4∫C t dt.

The integral ∫C dt represents the arc length of the circle, which is the circumference of the circle. Since the circle has a radius 4, the circumference is 2π(4) = 8π.

The integral ∫C t dt represents the average value of t over the circle, which is zero since t is symmetric around the circle.

Therefore, the final result is 64(8π) + 4(0) = 512π.

Visit here to learn more about radius:

brainly.com/question/24051825

#SPJ11

arrange the steps in the correct order to compute 3^302 mod 11.3302 32 330091 9 (mod 5) 3300(37515 (mod 5) 34 E1 (mod )2 3mod 5 4

Answers

Answer:

3^302 mod 11 = 9.

Step-by-step explanation:

The correct order to compute 3^302 mod 11 is:

Find the remainder of 302 divided by 10 using modular arithmetic: 302 mod 10 = 2.

Use Euler's totient theorem to find the remainder of 11^(10-1) divided by 10: 11^(10-1) mod 10 = 1.

Raise 3 to the power of the remainder from step 1: 3^2 = 9.

Divide the result from step 3 by the result from step 2: 9/1 = 9.

Take the remainder of the result from step 4 divided by 11 using modular arithmetic: 9 mod 11 = 9.

Therefore, 3^302 mod 11 = 9.

To know more about remainder refer here

https://brainly.com/question/30302805#

#SPJ11

The mean of a set of data is 2.94 and its standard deviation is 2.81. Find the z score for a value of 6.88. 1.40 1.54 1.70 1.26

Answers

The z-score for the supplied data set's value of 6.88 is roughly 1.40.

The formula: can be used to determine the z-score for a certain value in a data set.

z = (x - μ) / σ

Where: x is the number we want to use to determine the z-score.

The average value of the data set is.

The data set's standard deviation is.

The data set's mean in this instance is 2.94, and its standard deviation is 2.81. The z-score for the value 6.88 of x is what we're looking for.

The z-score can be determined using the following formula:

z = (6.88 - 2.94) / 2.81 z = 3.94 / 2.81 z ≈ 1.40

As a result, the z-score for the supplied data set's value of 6.88 is roughly 1.40.

To know more about standard deviation refer to

https://brainly.com/question/23907081

#SPJ11

​a) If the confidence interval for the difference in population proportions p1​ - p2 includes​ 0, what does this​ imply? ​
b) If all the values of a confidence interval for two population proportions​ are​ positive, then what does​ this​ imply? ​
c) If all the values of a confidence interval for two population proportions​ are​ negative, then what does​ this​ imply?
d) Explain the difference between sampling with replacement and sampling without replacement. Suppose you had the names of 10​students, each written on a 3 by 5​ notecard, and want to select two names. Describe both procedures.

Answers

a) p1 - p2 includes 0, this implies that there is no significant difference between the two population proportions.

b) p1 is significantly greater than population proportion p2.

c) p1 is significantly less than population proportion p2.

d) With replacement and Without replacement.



a) If the confidence interval for the difference in population proportions p1 - p2 includes 0, this implies that there is no significant difference between the two proportions, and any observed difference could be due to random chance.

b) If all the values of a confidence interval for two population proportions are positive, this implies that population proportion p1 is significantly greater than population proportion p2.

c) If all the values of a confidence interval for two population proportions are negative, this implies that population proportion p1 is significantly less than population proportion p2.

d) Sampling with replacement is when an item is selected, recorded, and then returned to the population before the next item is selected. Sampling without replacement is when an item is selected, recorded, and not returned to the population before the next item is selected. In the case of selecting two names from 10 notecards:

- With replacement: Pick a notecard, write down the name, return it to the pile, shuffle, and pick another notecard (it is possible to select the same name twice).
- Without replacement: Pick a notecard, write down the name, set it aside, and then pick another notecard from the remaining nine (each student can only be selected once).

Know more about the population proportions

https://brainly.com/question/24232216

#SPJ11

Let A be a set with 3 elements. Find two relations R and S on A such that R is reflexive and symmetric but not transitive, S is transitive but neither reflexive nor symmetric, R ∪ S ≠ A × A, and R ∩ S = ∅.

Answers

Let's consider the set A = {a, b, c} with three elements.

Answer : Relation R is reflexive and symmetric but not transitive.

Relation S is transitive but neither reflexive nor symmetric.

Relation R:

R = {(a, a), (b, b), (c, c), (a, b), (b, a)}

R is reflexive because every element in A is related to itself, and it is symmetric because if (a, b) is in R, then (b, a) is also in R. However, R is not transitive because although (a, b) and (b, a) are both in R, (a, a) is not in R.

Relation S:

S = {(a, b), (b, c)}

S is transitive because if (a, b) and (b, c) are both in S, then (a, c) is also in S. However, S is not reflexive because (a, a) is not in S, and it is not symmetric because (b, a) is not in S.

R ∪ S = {(a, a), (b, b), (c, c), (a, b), (b, a), (b, c)}

This is not equal to A × A since (c, a) and (c, c) are missing.

R ∩ S = ∅

There are no common elements between R and S.

To summarize:

Relation R is reflexive and symmetric but not transitive.

Relation S is transitive but neither reflexive nor symmetric.

R ∪ S ≠ A × A.

R ∩ S = ∅.

Learn more about reflexive : brainly.com/question/29119461

#SPJ11

Urgent - will give brainliest to simple answer

Would this be A?​

Answers

The statement about circle that is not true is that you can find the arc length of a sector if you know the circumference and radius of the circle. That is option B.

How to calculate the length of an arc of a circle?

To calculate the length of an arc of a given circle the formula that should be used = central angle(∅) × radius

While to calculate the area of the sector of a given circle, the formula that should be used = (θ/360º) × πr²

Where;

r = radius

∅ = central angle of the circle.

Therefore the statement that is false concerning a circle is that 'you can find the arc length of a sector if you know the circumference and radius of the circle'.

Learn more about circle here:

https://brainly.com/question/29614115

#SPJ1

Find the least squares solution of each of the following systems: x_1 + x_2 = 3 2x_1 - 3x_2 = 1 0x_1 + 0x_2 = 2 (b) -x_1 + x_2 = 10 2x_1 + x_2 = 5 x_1 - 2x_2 = 20 For each of your solution x cap in Exercise 1, determine the projection p = A x cap. Calculate the residual r(x cap). Verify that r(x cap) epsilon N(A^T).

Answers

a. AT r(Xcap) is not equal to zero, r(Xcap) is not in the null space of AT.

b. AT r(Xcap) is equal to zero, we can conclude that r(Xcap) is in the null space of AT.

What is matrix?

A group of numbers built up in a rectangular array with rows and columns. The elements, or entries, of the matrix are the integers.

(a) To find the least squares solution of the system:

x₁ + x₂ = 3

2x₁ - 3x₂ = 1

0x₁ + 0x₂ = 2

We can write this system in matrix form as AX = B, where:

A = [1 1; 2 -3; 0 0]

X = [x₁; x₂]

B = [3; 1; 2]

To find the least squares solution Xcap, we need to solve the normal equations:

ATAXcap = ATB

where AT is the transpose of A.

We have:

AT = [1 2 0; 1 -3 0]

ATA = [6 -7; -7 10]

ATB = [5; 8]

Solving for Xcap, we get:

Xcap = (ATA)-1 ATB = [1.1; 1.9]

To find the projection P = AXcap, we can simply multiply A by Xcap:

P = [1 1; 2 -3; 0 0] [1.1; 1.9] = [3; -0.7; 0]

To calculate the residual r(Xcap), we can subtract P from B:

r(Xcap) = B - P = [3; 1; 2] - [3; -0.7; 0] = [0; 1.7; 2]

To verify that r(Xcap) ∈ N(AT), we need to check if AT r(Xcap) = 0. We have:

AT r(Xcap) = [1 2 0; 1 -3 0] [0; 1.7; 2] = [3.4; -5.1; 0]

Since AT r(Xcap) is not equal to zero, r(Xcap) is not in the null space of AT.

(b) To find the least squares solution of the system:

-x₁ + x₂ = 10

2x₁ + x₂ = 5

x₁ - 2x₂ = 20

We can write this system in matrix form as AX = B, where:

A = [-1 1; 2 1; 1 -2]

X = [x₁; x₂]

B = [10; 5; 20]

To find the least squares solution Xcap, we need to solve the normal equations:

ATAXcap = ATB

where AT is the transpose of A.

We have:

AT = [-1 2 1; 1 1 -2]

ATA = [6 1; 1 6]

ATB = [45; 30]

Solving for Xcap, we get:

Xcap = (ATA)-1 ATB = [5; -5]

To find the projection P = AXcap, we can simply multiply A by Xcap:

P = [-1 1; 2 1; 1 -2] [5; -5] = [0; 15; -15]

To calculate the residual r(Xcap), we can subtract P from B:

r(Xcap) = B - P = [10; 5; 20] - [0; 15; -15] = [10; -10; 35]

To verify that r(Xcap) ∈ N(AT), we need to check if AT r(Xcap) = 0. We have:

AT r(Xcap) = [-1 2 1; 1 1 -2] [10; -10; 35] = [0; 0; 0]

Since, AT r(Xcap) is equal to zero, we can conclude that r(Xcap) is in the null space of AT.

Learn more about matrix on:

https://brainly.com/question/7437866

#SPJ4

A gold bar is similar in shape to a rectangular prism. A gold bar is approximately 7 1 6 in. X2g in. X17 in. If the value of gold is $1,417 per ounce, about how much is one gold bar worth? Use the formula w~ 11. 15n, where w is the weight in ounces and n = volume in cubic inches, to find the weight in ounces. Explain how you found your answer. ​

Answers

One gold bar is worth approximately $2,734,193.52.
In summary, one gold bar is worth approximately $2,734,193.52.

To find the weight of the gold bar in ounces, we can use the formula w ~ 11.15n, where w is the weight in ounces and n is the volume in cubic inches.
The dimensions of the gold bar are given as 7 1/16 in. x 2 in. x 17 in. To find the volume, we multiply these dimensions: 7.0625 in. x 2 in. x 17 in. = 239.5 cubic inches.
Using the formula, we can find the weight in ounces: w ≈ 11.15 * 239.5 ≈ 2670.425 ounces.
Now, to calculate the value of the gold bar, we multiply the weight in ounces by the value per ounce, which is $1,417: $1,417 * 2670.425 ≈ $2,734,193.52.
Therefore, one gold bar is worth approximately $2,734,193.52 based on the given dimensions and the value of gold per ounce.

Learn more about approximately here
https://brainly.com/question/31695967



#SPJ11

Write an equation of the line tangent to the graph of f at the point where x=-1

Answers

Answer:

x=-1=45

Step-by-step explanation:

if a chi-square goodness of fit test ends in a non-significant result it means that the expected frequencies are significantly different than the observed frequencies. true false

Answers

False. If a chi-square goodness of fit test results in a non-significant result, it means that the expected frequencies and the observed frequencies are not significantly different from each other.

The chi-square goodness of fit test is used to determine whether the observed data follows a specific distribution or not. It is based on the comparison of the observed frequencies with the expected frequencies.

If the calculated chi-square value is greater than the critical value, then we reject the null hypothesis and conclude that the observed frequencies are significantly different from the expected frequencies. This suggests that the sample data does not provide enough evidence to reject the null hypothesis that there is no difference between the observed and expected frequencies. On the other hand, if the calculated chi-square value is less than the critical value, we fail to reject the null hypothesis, which means that the observed frequencies are not significantly different from the expected frequencies. Therefore, a non-significant result does not indicate that the expected frequencies are significantly different from the observed frequencies, but rather that they are not significantly different from each other.

Know more about the chi-square

https://brainly.com/question/4543358

#SPJ11

1. ) A box is full of blue pens and green pens. There are 64 total pens in the box and 52 red


pens. Answer the following rounded to 4 decimal places

Answers

The answer is as follows:49.76 is the rounded answer to 4 decimal places.

Let's assume that there are x blue pens and y green pens in the box. Therefore, the total number of pens in the box is 64, and the number of red pens is 52.Using these equations, we can form a system of equations:x + y = 64 - - - (1)52 = 0.813(x + y) - - - (2)Substituting equation (1) into equation (2), we get:52 = 0.813x + 0.813y64 - y = 0.813x + 0.813y0.187x = 12 - yx = (12 - y) / 0.187Substituting the value of x into equation (1), we get:y + (12 - y) / 0.187 = 64y + 64 / 0.187 - 12 / 0.187 = y14.24 = yTherefore, there are 14.24 green pens and (64 - 14.24) = 49.76 blue pens in the box. Hence, the answer is as follows:49.76 is the rounded answer to 4 decimal places.

Learn more about the word decimal here,

https://brainly.com/question/28393353

#SPJ11

At the end of 1999 there were more than 58,000 patients awaiting transplants of a variety of organs such as livers, hearts, and kidneys. A national organ donor organization is trying to estimate the proportion of all people who would be willing to donate their organs after their death to help transplant recipients. Which one of the following would be the most appropriate sample size required to ensure a margin of error of at most 3 percent for a 98% confidence interval estimate of the proportion of all people who would be willing to donate their organs? (A) 175 (B) 191 (C) 1510 (D) 1740 (E) 1845 ОА B Ос D ОЕ

Answers

The most appropriate sample size is (B) 191.

We can use the formula for the required sample size for a proportion:

n = (zα/2)^2 * p(1 - p) / E^2

where zα/2 is the critical value for the desired level of confidence (98% corresponds to zα/2 = 2.33), p is the estimated proportion of people willing to donate their organs (unknown), and E is the desired margin of error (0.03).

To be conservative, we can use p = 0.5, which gives the largest possible value of n.

Plugging in the values, we get:

n = (2.33)^2 * 0.5(1 - 0.5) / 0.03^2 ≈ 191

Therefore, the most appropriate sample size is (B) 191.

To know more about proportion refer here:

https://brainly.com/question/30657439

#SPJ11

An account paying 3. 2% interest compounded semiannually has a balance of $32,675. 12. Determine the amount that can be withdrawn from the account semiannually for 5 years. Assume ordinary annuity and round to the nearest cent. A. $3,505. 80 b. $3,561. 90 c. $3,039. 09 d. $2,991. 23.

Answers

Rounding to the nearest cent, the amount that can be withdrawn from the account semiannually for 5 years is approximately $3,029.09.Therefore, the correct answer choice is: C. $3,029.09

To determine the amount that can be withdrawn from the account semiannually for 5 years, we can use the formula for the future value of an ordinary annuity:

Future Value = Payment * ((1 + r/n)^(n*t) - 1) / (r/n)

Where:

Payment is the amount withdrawn semiannually

r is the annual interest rate (3.2% = 0.032)

n is the number of compounding periods per year (semiannually = 2)

t is the number of years (5)

We need to solve for the Payment amount. Let's plug in the given values:

32675.12 = Payment * ((1 + 0.032/2)^(2*5) - 1) / (0.032/2)

32675.12 = Payment * (1.016^10 - 1) / 0.016

32675.12 = Payment * (1.172449678 - 1) / 0.016

32675.12 = Payment * 0.172449678 / 0.016

32675.12 = Payment * 10.778104875

Payment = 32675.12 / 10.778104875

Payment ≈ $3029.09

Rounding to the nearest cent, the amount that can be withdrawn from the account semiannually for 5 years is approximately $3,029.09.

Therefore, the correct answer choice is:

C. $3,029.09.

To know more about annuity, visit:

https://brainly.com/question/29457281

#SPJ11

Five boys and 4 girls want to sit on a bench. how many ways can they sit on the bench?

Answers

there are 362880 ways for the 5 boys and 4 girls to sit on the bench.

There are 9 people who want to sit on a bench. We need to find the number of ways to arrange 9 people on the bench. We can use the formula for permutations, which is:

n! / (n - r)!

where n is the total number of items, and r is the number of items we want to arrange.

In this case, n = 9 (since there are 9 people) and r = 9 (since we want to arrange all 9 people).

So the number of ways to arrange 9 people on a bench is:

9! / (9 - 9)! = 9! / 0! = 362880

what is permutations?

Permutations refer to the different ways that a set of objects can be arranged or ordered. Specifically, a permutation of a set of objects is a way of arranging those objects in a particular order.

For example, if we have three objects A, B, and C, the possible permutations of those objects are ABC, ACB, BAC, BCA, CAB, and CBA. Each of these permutations represents a different way of arranging the objects.

To learn more about number visit:

brainly.com/question/17429689

#SPJ11

use the laplace transform to solve the given integrodifferential equation. y'(t) = 1 − sin t − t y()d 0 , y(0) = 0

Answers

The solution to the integro-differential equation is:

y(t) = t - sin(t). The initial condition y(0) = 0 is satisfied by the solution.

To solve the given integro-differential equation using the Laplace transform, we'll follow these steps:

Step 1: Take the Laplace transform of both sides of the equation.

Step 2: Solve for the Laplace transform of y(t).

Step 3: Apply the inverse Laplace transform to obtain the solution in the time domain.

Let's begin:

Step 1: Taking the Laplace transform of both sides of the equation:

L{y'(t)} = L{1 - sin(t) - t ∫[0]^t y(u) du}

Using the linearity property of the Laplace transform and the derivative property, we have:

sY(s) - y(0) = 1/s - L{sin(t)} - L{t ∫[0]^t y(u) du}

Step 2: Solving for the Laplace transform of y(t):

We know that L{sin(t)} = 1/(s^2 + 1) and L{t ∫[0]^t y(u) du} = Y(s)/s.

Rearranging the equation, we have:

sY(s) = 1/s - 1/(s^2 + 1) - Y(s)/s

Multiplying through by s and rearranging further, we get:

s^2 Y(s) + Y(s) = 1 - 1/(s^2 + 1)

Factoring out Y(s), we have:

Y(s) (s^2 + 1) = (s^2 + 1) / (s^2 + 1) - 1/(s^2 + 1)

Y(s) (s^2 + 1) = (s^2 + 1 - 1) / (s^2 + 1)

Y(s) (s^2 + 1) = s^2 / (s^2 + 1)

Dividing both sides by (s^2 + 1), we obtain:

Y(s) = s^2 / (s^2 + 1)

Step 3: Applying the inverse Laplace transform to obtain the solution in the time domain:

Using the table of Laplace transforms, we find that the inverse Laplace transform of s^2 / (s^2 + 1) is t - sin(t).

Therefore, the solution to the integro-differential equation is:

y(t) = t - sin(t)

Note: The initial condition y(0) = 0 is satisfied by the solution.

To know more about  Laplace transform refer to

https://brainly.com/question/30759963

#SPJ11

The unit has you writing a script that ends each level when a sprite gets to the right edge of the screen. Propose another "level completed" solution where the levels ends when the player hits a certain part of the screen WITHOUT relying on coordinates. Describe your solution, including the code blocks you would use instead of coordinates. (Hint: think about landing on a target or crossing a finish line!)

Answers

To complete a level of a game when the player reaches a particular part of the screen without relying on coordinates, it is necessary to use the position of sprites in the code blocks. This can be done by setting up a target sprite, which the player can reach by jumping or running to that position.

Here is a possible solution for completing a level in a game when the player reaches a target sprite:First, create a target sprite in the center of the screen or any other position where you want the level to end. You can use an image of a flag, a finish line, or any other visual cue to indicate that the player has completed the level.Next, use the "if touching" code block to detect when the player sprite touches the target sprite.

Here's an example of the code blocks you could use: When the green flag is clicked:Repeat until the level is complete:If the player sprite touches the target sprite:Play a sound to indicate success.End the level.The above code blocks use a "repeat until" loop to keep checking if the player sprite touches the target sprite. If they do, the level is complete, and a sound is played to indicate success. You could replace the sound with any other actions you want to happen when the level is complete.To summarize, to complete a level in a game when the player reaches a particular part of the screen without relying on coordinates, you need to use a target sprite and check when the player sprite touches it. The "if touching" code block can be used for this purpose, and you can add any actions you want to happen when the level is complete.

To know more about coordinates visit:-

https://brainly.com/question/31828911

#SPJ11

Give a constraint equation, if one exists, on the vectors in the range of the matrices in Exercise 5. 5. Give a vector, if one exists, that generates the null space of the follow- ing systems of equations for 'matrices. Which of these seven sys- tems/matrices are invertible? (Consider the coefficient matrix and ig- nore the particular right-side values in parts (e) and (1).] 1 2 4 - 1 (a) 2 4 (b) 2 5 -2 3 1 [-

Answers

Let's analyze the two matrices given and determine any constraint equations at the vectors of their range, as well as discover a vector that generates the null space.

Matrix (A) is not invertible and Matrix (B) is invertible.

Matrix (A):

[tex]\left[\begin{array}{ccc}-1&-2\\-2&4\end{array}\right][/tex]

Give a constraint equation, if one exists, on the vectors in the range of the matrices in Exercise 5. 5. Give a vector, if one exists, that generates the null space of the follow- ing systems of equations for 'matrices

To find the constraint equation on the vectors within the range of this matrix, we are able to perform row operations to determine the row-echelon shape or reduced row-echelon form of the matrix. This technique can help us become aware of any linear relationships among the rows of the matrix.

Performing row operations on the matrix (A):

R2 = R2 + 2R1

The resulting matrix in row-echelon form is:

[tex]\left[\begin{array}{ccc}-1&-2\\0&0\end{array}\right][/tex]

From this row-echelon shape, we will see that there may be a constraint equation on the vectors within the range: the second row includes all zeros. This means that the second row is a linear mixture of the primary row.

In other words, any vector within the variety of this matrix ought to satisfy the equation -1x - 2y = 0 or y = -0.5x, where x and y represent the additives of the vectors in the range.

Now allow's circulate directly to the second matrix:

Matrix (B):

[tex]\left[\begin{array}{ccc}-4&-1&2\\2&5&1\\-2&3&-1\end{array}\right][/tex]

To discover a vector that generates the null area, we want to decide the solutions to the homogeneous machine of equations Ax = 0, wherein A is the coefficient matrix.

By appearing row operations on the matrix (B), we can reap its row-echelon shape:

R2 = R2 + 2R1

R3 = R3 - R1

The resulting row-echelon shape is:

-[tex]\left[\begin{array}{ccc}-4&-1&2\\0&0&5\\0&2&-3\end{array}\right][/tex]

The last row of the row-echelon form implies that 0x + 2y - 3z = 0 or 2y - 3z = 0. Thus, a vector that generates the null space of this matrix is [z, (3/2)z, z], where z is a loose variable.

Now, to determine which of these matrices are invertible, we can take a look at their determinant. If the determinant of a matrix is nonzero, then the matrix is invertible.

For Matrix (A):

Determinant = (-1)(four) - (-2)(-2) = 4 - 4= 0

Since the determinant of Matrix (A) is 0, it isn't invertible.

For Matrix (B):

Determinant = (-4)(5)(-3) + (-1)(2)(-2) + (2)(1)(2) = -60 + 4+ 4= -52

Since the determinant of Matrix (B) is not 0 (-52 ≠ 0), it's far invertible.

To summarize:

Matrix (A) has a constraint equation at the vectors in its range: y = -0.5x. Matrix (A) is not invertible.

Matrix (B) has a constraint equation on the vectors in its variety: None (considering that all rows are linearly unbiased). Matrix (B) is invertible.

To know more about vectors,

https://brainly.com/question/28028700

#SPJ1

The correct question is:

"Give a constraint equation, if one exists, on the vectors in the range of the matrices in Exercise 5. 5. Give a vector, if one exists, that generates the null space of the follow- ing systems of equations for 'matrices. Which of these seven systems/matrices are invertible? (Consider the coefficient matrix and ignore the particular right-side values in parts)

Matrix A =  [tex]\left[\begin{array}{ccc}-1&-2\\-2&4\end{array}\right][/tex]  

Matrix B =  [tex]\left[\begin{array}{ccc}4&-1&2\\2&5&1\\2&3&-1\end{array}\right][/tex]"

Students may purchase Student may purchase ingredients from the camp store if they wish to make s'mores at the campfire. For every 15 students,the ingredients cost the camp store $31. 50 estimate the cost for 1 student

Answers

The estimated cost for one student to purchase the ingredients for s'mores at the camp store is $2.10.

To estimate the cost for one student, we can divide the total cost for 15 students by the number of students. Given that the ingredients cost $31.50 for 15 students, we can calculate the cost for one student as follows:

Cost for 1 student = Total cost for 15 students / Number of students

Cost for 1 student = $31.50 / 15

Cost for 1 student ≈ $2.10

Therefore, the estimated cost for one student to purchase the ingredients for s'mores at the camp store is approximately $2.10. This calculation assumes that the cost is evenly distributed among the students and that the quantity of ingredients per student remains constant.

Learn more about purchase here:

https://brainly.com/question/30478565

#SPJ11

please help fast worth 30 points write a function for the graph in the form y=mx+b

Answers

The linear function  in the graph is:

y = (3/2)x + 9/2

How to find the linear function?

A general linear function can be written as:

y = ax + b

Where a is the slope and b is the y-intercept.

If a line passes through two points (x₁, y₁) and (x₂, y₂), then the slope is:

a = (y₂ - y₁)/(x₂ - x₁)

Here we can see the points (1, 6) and (-1, 3), then the slope is:

a = (6 - 3)(1 + 1) = 3/2

y = (3/2)*x + b

To find the value of b, we can use one of these points, if we use the first one:

6 = (3/2)*1 + b

6 - 3/2 = b

12/2 - 3/2 = b

9/2 = b

The linear function is:

y = (3/2)x + 9/2

Learn more about linear functions at:

https://brainly.com/question/15602982

#SPJ1

In the picture below, polygon ABCD ~ polygon WXYZ. Solve for m.
A
13
D 10 C
12
B
W
24
Z 15 Y
m
X
m =

Answers

Since polygon ABCD is similar to polygon WXYZ, the corresponding sides are proportional.

That means:

AB/WX = BC/XY = CD/YZ = AD/WZ

We can use this fact to set up the following equations:

AB/WX = 13/24

CD/YZ = 12/15 = 4/5

AD/WZ = 10/m

We are given that AB = 13 and WX = 24, so we can substitute those values in the first equation:

13/24 = BC/XY

We are also given that CD = 12 and YZ = 15, so we can substitute those values in the second equation:

4/5 = BC/XY

Since both equations equal BC/XY, we can set them equal to each other:

13/24 = 4/5

To solve for m, we can use the third equation:

10/m = AD/WZ

We know that AD = AB + BC = 13 + BC, and WZ = WX + XY = 24 + XY. Since BC/XY is the same in both polygons, we can use the results from our previous equations to find that BC/XY = 4/5.

So we have:

AD/WZ = (13 + BC)/(24 + XY) = (13 + (4/5)XY)/(24 + XY) = 10/m

Now we can solve for XY:

13 + (4/5)XY = (10/m)(24 + XY)

Multiplying both sides by m(24 + XY), we get:

13m(24 + XY)/5 + mXY(24 + XY) = 10(13m + 10XY)

Expanding and simplifying, we get:

312m/5 + 13mXY/5 + mXY^2 = 130m + 100XY

Rearranging and simplifying further, we get:

mXY^2 - 87mXY + 650m - 1560 = 0

We can use the quadratic formula to solve for XY:

XY = [87m ± sqrt((87m)^2 - 4(650m - 1560)m)] / 2m

Simplifying under the square root:

XY = [87m ± sqrt(7569m^2 - 2600m)] / 2m

XY = [87m ± sqrt(529m^2)] / 2m

XY = (87 ± 23m) / 2

Since XY must be positive, we can use the positive solution:

XY = (87 + 23m) / 2

Now we can substitute this value for XY in the equation we derived earlier:

13 + (4/5)XY = (10/m)(24 + XY)

13 + (4/5)((87 + 23m) / 2)= (10/m)(24 + (87 + 23m) / 2)

Multiplying both sides by 10m, we get:

130m + 52(87 + 23m) / 10 = (240 + 87m) / 2

Simplifying and solving for m, we get:

1300m + 52(87 + 23m) = 240 + 87m

1300m + 4524 + 1196m = 240 + 87m

2403m = -4284

m = -4284 / 2403

m ≈ -1.78

Therefore, the value of m is approximately -1.78.

Find the perimeter with vertices A(–2, 1), B(6, 1), and C(–2, 7)

Answers

The perimeter of the triangle is 24cm

What is perimeter?

Perimeter is a math concept that measures the total length around the outside of a shape. Perimeter can be calculated by adding all the sides of the shape together.

To calculate the sides of the triangle,

AB = √ 6-(-2)² + 1-1)²

AB = √ 8²

AB = 8 units

BC = √ 6-(-2)² + (1-7)²

BC = √ 8² + 6²

BC = √64+36

BC = √ 100

= 10 units

AC = √ -2-(-2) + 1-7)²

AC = √ 6²

AC = 6

Therefore the perimeter of the triangle is

8+6+10

= 24 units.

The perimeter of the shape is 24 units

learn more about perimeter of the triangle from

https://brainly.com/question/17335144

#SPJ1

Evaluate the indefinite integral. (Use C for the constant of integration.) et 3 + ex dx len 2(3+ex)(:)+c * Need Help? Read It Watch It Master It [0/1 Points] DETAILS PREVIOUS ANSWERS SCALCET8 5.5.028. Evaluate the indefinite integral. (Use C for the constant of integration.) ecos(5t) sin(5t) dt cos(5t) +CX Need Help? Read It [-/1 Points] DETAILS SCALCET8 5.5.034.MI. Evaluate the indefinite integral. (Use C for the constant of integration.) cos(/x) dx 78

Answers

We can continue this process to obtain a power series expansion for the antiderivative.

To evaluate the indefinite integral of [tex]e^t3 + e^x dx[/tex], we need to integrate each term separately. The antiderivative of [tex]e^t3[/tex] is simply [tex]e^t3[/tex], and the antiderivative of is also [tex]e^x.[/tex] Therefore, the indefinite integral is:

[tex]\int (e^t3 + e^x)dx = e^t3 + e^x + C[/tex]

where C is the constant of integration.

To evaluate the indefinite integral of e^cos(5t)sin(5t)dt, we can use the substitution u = cos(5t). Then du/dt = -5sin(5t), and dt = du/-5sin(5t). Substituting these expressions, we get:

[tex]\int e^{cos(5t)}sin(5t)dt = -1/5 \int e^{udu}\\= -1/5 e^{cos(5t)} + C[/tex]

where C is the constant of integration.

Finally, to evaluate the indefinite integral of cos(1/x)dx, we can use the substitution u = 1/x. Then [tex]du/dx = -1/x^2[/tex], and [tex]dx = -du/u^2[/tex]. Substituting these expressions, we get:

[tex]\int cos(1/x)dx = -\int cos(u)du/u^2[/tex]

Using integration by parts, we can integrate this expression as follows:

[tex]\int cos(u)du/u^2 = sin(u)/u + \int sin(u)/u^2 du\\= sin(u)/u - cos(u)/u^2 - \int 2cos(u)/u^3 du\\= sin(u)/u - cos(u)/u^2 + 2\int cos(u)/u^3 du[/tex]

We can repeat this process to obtain:

∫[tex]cos(1/x)dx = -sin(1/x)/x - cos(1/x)/x^2 - 2∫cos(1/x)/x^3 dx[/tex]

This is an example of a recursive formula for the antiderivative, where each term depends on the integral of the next lower power. We can continue this process to obtain a power series expansion for the antiderivative.

for such more question on indefinite integral

https://brainly.com/question/22008756

#SPJ11

To evaluate the indefinite integral, we need to find the antiderivative of the given function. For the first question, the indefinite integral of et3 + ex dx is:∫(et3 + ex)dx = (1/3)et3 + ex + C,where C is the constant of integration.

To evaluate the indefinite integral of the given function, we will perform integration with respect to x:

∫(3e^t + e^x) dx

We will integrate each term separately:

∫3e^t dx + ∫e^x dx

Since e^t is a constant with respect to x, we can treat it as a constant during integration:

3e^t∫dx + ∫e^x dx

Now, we will find the antiderivatives:

3e^t(x) + e^x + C

So the indefinite integral of the given function is:

(3e^t)x + e^x + C

To learn more about antiderivative : brainly.com/question/31385327

#SPJ11

Other Questions
Of the bacteria used in (staphylococcus epidermidis, escherichia coli, and bacillus subtilis), e. coli would have the highest thermal death point.a. Trueb. False Find the current balance for Jeffs savings account if he had a balance of $396.80, made three $15 deposits, withdrew $125, and earned $1.04 interest. 7. an outbreak of disease over a wide geographic region is a(n): true/false. consumer nondurables, such as food products, generally show the highest amount of sensitivity toward differences in national tastes and habits. A serious lack of 02 typically leads to the following in humans?A) Alcoholic fermentation B) Homolactic fermentationC) Generation of optimal ATP levelsD) All of the aboveE) Both B and C are correct When 2.50 g Na reacted with excess Br2, 9.82 g of NaBr was obtained. What was the percent yield? 2Na + Br2 2NaBr Molar Mass, g*mol-1 NaBr 102.89 76.6% 98.8% 65.5% 87.7% The table shows the number of runs earned by two baseball players.Player APlayer B2, 3, 1, 3, 2, 2, 1, 3, 7 1, 4, 5, 1, 2, 4, 5, 5, 10Find the best measure of variability for the data and determine which player was more consistent. Player B is the most consistent, with an IQ of 3.5. Player B is the most consistent, with a range of 9. Player A is the most consistent, with an IQ of 1.5. Player A'is the most consistent, with a range of 6. who provided most of the labor needed to build the erie canal? Emma spent $60. 20 on 5 dozen bagels and a gallon of iced tea. The price of the gallon of iced tea was $5. 25. The following equation can be used to find d, the price of each dozen of bagels. 5d + 5. 25 = 60. 2 What was the price of each dozen of bagels? does the medium in which a wave travels move with the wave? sometimes no always yes Sketch the asymptotes of the bode magnitude plot for the following transfer function. remember to determine slopes and break points.L(s) = 1000 (s+0.1) / s(s+1) (s+8)^2! T/F : inflammation can last anywhere from a few days to years as opposed to acute inflammation that lasts for minutes to hours mills states that an issue is a public matter when it is __________. the battery terminals on my car are loose and disconnecting occasionally. what product can i use to fix this problem? Hailey has $117. 39 in her savings account. She has -$121. 06 in her checking account. What inequality correctly compares the account values? In each of Problems 7 and 8, find the solution of the given initial-value problem. Describe the behavior of the solution as t-0o x(0) = 1-3)x, arrange lif, hcl, hf, and f2 in order of increasing normal boiling point. consider a random integer selected from the range from 2 to 10,000,000,000. approximately, what are the chances that the selected number is prime? hint: ln(10)2.30. Which problem below is the primary reasons for current dissatisfaction with IQ/achievement method of identifying learning disabilities?A. Students must wait until they are performing poorly in school to get help, which often does not occur until 3rd or 4th gradeB. The method identifies only a few students and it focuses too much on social aspects of LDC. Students with learning disabilities do not actually have normal intelligence, so LD is hard to distinguish from low achievementD. Proving a discrepancy between intelligence and achievement is difficult and unreliable because there is not enough focus on medical aspects of LD A condominium community has a swimming pool, tennis court and a biking trail. These facilities are most likely owned by what what